Instruction manual

ECLIPSE OMEGA MATRIX INSTRUCTION MANUAL
1-6
The type of cable used to connect the interface module to the non-4-wire device
varies with the device. Each of these connections is described more fully in the
individual manual for each interface.
The following interface modules are compatible with the Eclipse Omega matrix:
•TEL-14 telephone interface module
• CCI-22 dual party-line interface module
• FOR-22 four-wire interface module
• GPI-6 general purpose inputs interface module
• RLY-6 relay (general-purpose outputs) interface module
• AES-6 digital interface module
• DIG-2 digital interface module (transparent to the system, configured in ECS
as the type of panel it is connected to)
Each of these interfaces is described in its own manual. For a full description of
the operation, installation, and maintenance of an interface, refer to the
individual manual for that interface.