User guide

5 T-Desk Reference Manual
BaseStaon Sengs Tab
The BaseStaon Sengs tab displays all sengs related to the selected BaseStaon and real-me status of its associated
BeltStaons that are logged in at that point in me. From this tab, you can view and access BeltStaons or load previously
saved proles to the BaseStaon or the BeltStaon(s). In addion, you can access the wired intercom and auxillary audio
levels, relays, stage announce and call features, mic gain and mic kill sengs, sidetone, or front panel display opons.
System Status
The System Status sub-tab displays the current BaseStaon operang mode and the status of all BeltStaons (up to ve) that
are associated (and logged into) the currently selected BaseStaon. This informaon includes the name of the BeltStaon,
talk channels enabled and in use, baery level and alert, RF signal strength, and relay status (if any) for each BeltStaon. In
addion, there are three acve buons per each registered BeltStaon. By clicking the buon with the “BeltStaon name”
displayed, you are routed to the BeltStaon Sengs tab where you can adjust sengs specic to that BeltStaon. The “Mic
Kill” buon will de-latch the Talk buon(s) for that parcular BeltStaon. The BeltStaon user can re-enable the talk buon at
any me. The “Call Belt” buon iniates a call signal to that specic BeltStaon.