User guide

10 T-Desk Reference Manual
BeltStaon Sengs Tab
The BeltStaon Sengs tab displays ve sub-tabs that represent the BeltStaon slots and will display up to ve BeltStaons
logged into the corresponding BaseStaon. The sub-tabs will be named according to the BeltStaon name. Click on any of the
individual sub-tabs to adjust individual sengs for that BeltStaon.
y BeltStaon Name - displays the BeltStaon name and a snapshot of the BeltStaon’s talk channels enabled and in use,
baery level and alert, RF signal strength, and relay status (if any).
y Talk A/B or C/D Buon - the Talk buon(s) can be set to latching, momentary or disabled mode.
y Stage Announce - the Stage buon is limited to momentary or disabled mode; the Stage relay opon can be enabled or
disabled. Note: The Stage Relay is in addion to the ve BaseStaon relays.
y Channel Select A/B or C/D - a user can set each channel knob independently. The channels can be set to talk and listen to
both channels simultaneously, talk and listen on one channel only, or neither of the channels.
y Delay Switch - if enabled requires the channel knob to be pressed and held for a second before the channel will change.
y Talk Tones - when enabled the user will hear a tone through their headset when their Talk buon is pressed.
y Individual Relay - sets the relay opons:
» Relay Number - determines which BaseStaon relay will be triggered.
» Trigger - assigns which buon on the BeltStaon will iniate the relay acon.
y Roaming Bias - determines how frequently a BeltStaon searches for another BaseStaon when Roaming is enabled.
y Call On Talk - when enabled each BeltStaon can trigger a call alert on its current acve channel via the TALK buon.
y Volume Limits - each BeltStaon is capable of its own maximum and minimum volume level. Use the slider bar to adjust
the levels accordingly. Note: The maximum volume cannot be set below the minimum volume.
y Volume Press - if enabled the volume knobs must be pressed, then turned when making adjustments to volume levels.
y Call Buon - set to Enable to acvate the call feature on the BeltStaon.
y Call Alert - this opon determines how a call signal will be received by the BeltStaon; choose from an Audible tone,
vibrate, both or disable.
y Wireless ISO - this feature (when enabled) allows the user to press ENTER and talk only to the wireless users.
y Sidetone - adjusts the Sidetone volume level (dB) for the BeltStaon.
y Mic Gain - adjusts the Mic Gain level (dB) for the BeltStaon.
y Shared Audio - this feature controls whether the user will hear any return audio when operang in Shared Mode.
y Low Baery - when enabled the BeltStaon will generate an audible alert in the headset when the baery reaches 10%
charge.
y LED Brightness - controls the brightness of the talk LEDs on top of the BeltStaon.
y LCD Backlight - turns the BeltStaon display screen backlight on or o.
y Menu Lock - if enabled it allows the BeltStaon menu to be locked.