Instruction Manual

8 Tempest®24 00 MasterBelt
BeltSta on Overview
1- Volume- CH A and CH B
In Opera onal Mode, turning the Volume control adjusts the volume of the
audio. Volume indicators appear on the display during adjustment and are
expressed in Decibels (dB).
The Volume control has an op on to be set to “Volume Press” where it requires
a “press and turn” to adjust the volume level. The “Volume Press” op on can
be adjusted under the “Set Controls” sec on of the BeltSta on menu.
Pressing the Volume control in “Dual-listen” mode does nothing. In “Single-
listen” mode, pressing “CH A” enables channel A, and pressing “CH B” enables
channel B . The Volume control has a channel “Delay Switch” op on which
requires the knob to be pressed and held slightly longer in order to switch from
one channel to the other. This feature can be enabled under the “Set Controls”
sec on of the BeltSta on menu.
In Menu Mode, turning either Volume control allows the user to scroll the
op ons of the current menu screen. Pressing the Volume control selects the
op on.
2- STAGE Bu on
The Stage Announce (STAGE) bu on has no func onality when a BeltSta on is opera ng with a MasterBelt.
3- MENU Bu on
Pressing MENU while the BeltSta on is in Opera onal mode will select Menu Mode, and the Main Menu screen will be
displayed. Once in Menu Mode, pressing MENU again will act as an escape key and will back out of the current menu screen
moving the user up one level. Pressing the MENU bu on while at the Main Menu screen will exit Menu Mode and return
to Opera onal mode. The menu can be locked via a “Menu Lock” feature per BeltSta on.
4- ENTER Bu on
The ENTER bu on operates diff erently depending on the mode of the BeltSta on. In Menu Mode, pressing the ENTER
bu on selects the current menu op on and is the same as pressing a Volume control. A menu item is not selected un l the
ENTER bu on (or Volume control) is pressed.
The ENTER bu on can also ac vate Wireless ISO (wireless talk around), providing wireless communica on isolated from
any connected wired intercom system.
5- LCD
While in Opera onal Mode, the LCD displays the status of the BeltSta on including the name of
the currently communica ng MasterBelt, radio strength, ba ery level, and other data. The LCD
backlight and contrast can be adjusted from the LCD Adjustments menu screen under the LCD/
LED sec on of the BeltSta on menu.
6- CALL Bu on
The CALL Bu on sends call signal to any wireless BeltSta on on the same intercom channel. The Call signal will be routed to
intercom channels indicated by the user’s ac ve Talk bu on(s).
Note: The TALK bu on must be enabled to send a call signal.
Opera onal Display