Operation Manual

Emptying the dust container and cleaning the dust ﬁ lter

1. Push the release button on the dust bin and pull it out of

the device by the handle.

2. Hold the dust bin over an open garbage bin. The dust bin

should be as close as possible to the garbage bin so that

dust from the dust bin only falls into the garbage bin and

is not dispersed in the surrounding area.

3. Push the button to open the dust bin. The bottom of the

dust bin will open and the dirt will fall out.

4. Shut the bottom of the dust bin again. The fastener must

audibly lock into place.

5. If necessary, thoroughly rinse the dust container and the

plastic dust ﬁ lter with clear, lukewarm water.

– Open the dust container lid by releasing the catch on

the handle and ﬂ ipping up the lid.

– Remove the white dust ﬁ lter and the black foam dust

ﬁ lter.

Tap out the contents of the ﬁ lter over a dustbin

and brush off the loose dirt. Never clean the white

dust ﬁ lter with water! If necessary, the black foam

dust ﬁ lter may be cleaned clear, lukewarm water. CAU-

TION: Do not under any circumstances clean the

ﬁ lter in a washing machine or dishwasher! Shake

off any excess water and allow the dust ﬁ lter to dry

completely in the air before reinstalling them.

– Remove the plastic dust ﬁ lter by pulling it out of the dust

container. If necessary, thoroughly rinse the dust contain-

er and the plastic dust ﬁ lter with clear, lukewarm water.

CAUTION: Do not under any circumstances clean the

dust container or the plastic dust ﬁ lter in a washing

machine or dishwasher! Shake off any excess water

and allow the dust container and the plastic dust ﬁ lter to

dry completely in the air

. Place the plastic dust ﬁ lter back

into the dust container when it is completely dry.

09506_de-gb-fr-nl_V1.indb 2409506_de-gb-fr-nl_V1.indb 24 17.11.2014 13:38:2817.11.2014 13:38:28