Operation Manual

Assembly

Unpacking the product contents

ATTENTION!

❐ Risk of suffocation! Keep the packaging material away from children and animals.

❐ Always turn off the vacuum cleaner ﬁ rst before changing the nozzles.

• Unpack all parts and make sure that the scope of delivery is complete (see chapter

“Product contents and device overview”) and check for any damages from transport.

If you identify damages to the device or accessories, do not use them (!), instead

contact our customer service centre.

Inserting/removing the hose

• Insert the suction hose connector into the suction opening

on the dust bin. It must audibly lock into place.

• To remove the suction hose push the button on the con-

nector and pull the suction hose out.

Inserting/removing the telescoping tube

• Insert the open end of the handle into the corresponding

opening on the telescoping tube. In the process, turn the

handle back and forth somewhat. Check to make sure

that the connection is secure.

• To remove the telescoping tube pull it off of the handle.

Adjusting the length of the telescoping tube

• Push the slider on the telescoping tube down and set the

desired length.

• Release the slider and move the tube forward until it locks

into place.

Mounting/removing suction nozzles

• Insert the open end of the telescoping tube in one of the enclosed suction nozzles

up to the stop. Turn the nozzle back and forth slightly in the process.

• The suction nozzles can also be attached directly to the suction hose for more ﬂ ex-

ibility.

• To remove a suction nozzle pull it off.

09303_de-gb-fr-nl_V0.indb 2009303_de-gb-fr-nl_V0.indb 20 02.10.2014 12:38:3202.10.2014 12:38:32