Operation Manual

28
5. The back of the dust fi lter (E) consists of a black foam fi l-
ter (D) which can be removed. Remove it and tap out the
contents of the fi lter over a dustbin and brush off the loose
dirt. As required, you may rinse the foam fi lter (!) (D) using
clear, lukewarm water. CAUTION: Never clean the foam
fi lter in a washing machine or dishwasher! Then press
out the fi lter and allow it to dry completely in the air before
reinserting it in the dust fi lter.
6. Remove the plastic dust fi lter from the dust container.
7. If necessary, thoroughly rinse the dust container and the
plastic dust fi lter with clear, lukewarm water. CAUTION:
Do not under any circumstances clean the dust con-
tainer or the plastic dust fi lter in a washing machine
or dishwasher! Then shake off any excess water and al-
low the fi lter to dry completely in the air before reinserting
it.
8. Place the plastic dust fi lter back into the dust container, place the dust fi lter back with
the foam fi lter on the plastic dust fi lter and then put the dust container lid back on
the dust container. Screw the dust container lid fi rmly onto the dust container so that
the arrow marking on the dust container lid points towards the closed lock symbol
on the dust container.
9. Place the dust container into the device: Hold it by the handle and place the bot-
tom of the container into the device fi rst. Then push the handle against the device
housing until the dust container is heard to lock in place. Hold the device by the
handle and lift it to check that the dust container is in the correct position.
Cleaning the Exhaust Air Filter
The exhaust air fi lter is located in the compartment on the back of the vacuum cleaner
(see „Items Supplied and Device Overview“ chapter, „Rear View“ section).
1. Press the fi lter compartment lid catch and remove the lid.
2. Remove the exhaust air fi lter by pulling it down and out of
the fi lter compartment.
3. Tap out the contents of the exhaust air fi lter over a dustbin
and brush off the loose dirt. Wipe down the dust container
using a damp cloth.
4. If necessary, thoroughly rinse the exhaust air fi lter using
clear, lukewarm water. CAUTION: Do not under any cir-
cumstances clean the fi lter in a washing machine or
dishwasher! Then shake off any excess water and allow
the fi lter to dry completely in the air before reinserting it.
5. When all parts are dry, insert the exhaust air fi lter in the fi lter compartment.
6. Place the fi lter compartment lid onto the exhaust fi lter compartment. It must engage
audibly.
(D)
(E)
09271_DE-GB-FR-NL_V1_1.indb 2809271_DE-GB-FR-NL_V1_1.indb 28 17.04.2014 11:35:0217.04.2014 11:35:02