Operation Manual

21
❐ Do not submerge the device in water or other liquids in order to avoid electrical
shocks. Do not fi ll the dust bin with liquids.
❐ Never touch the device, the cord or the plug with wet hands.
❐ Do not insert anything in the device’s openings/nozzles and ensure that they are not
plugged.
❐ Never leave the device unattended when on or when connected to a power supply.
❐ Turn the device off by pulling the mains plug out of the socket
– if you stop using the device,
– if you are fi nished using the device,
– before you change any accessories,
– if an error or fault occurs during operation,
– if liquids or foreign debris have penetrated the device,
– before a storm,
– before you clean the device parts and accessories.
❐ The device must be deactivated when you pull the mains plug out of the socket or
insert it in the socket.
❐ Always pull on the plug itself and never on the cable!
❐ Never move the device by pulling it by the cord. Use the handles.
❐ Do not attempt to grease the wheels with lubricants or oil. Otherwise, this may cause
more dust or dirt to accumulate on the wheels.
❐ Empty the dust bin after every use. The fi lters must also be cleaned regularly to
prevent the motor from being overloaded.
❐ Allow the dust bin, dust fi lter and exhaust fi lter to dry completely before you reinstall
them in the device.
❐ Only use original spare parts provided by the manufacturer.
❐ Store the device in a cool, dry area that is not accessible to children and animals
when not in use.