Operation Manual

Cleaning the Exhaust Air Filter

The exhaust air ﬁ lter is located in the compartment on the back of the vacuum cleaner

(see „Items Supplied and Device Overview“ chapter, „Rear View“ section).

1. Press the ﬁ lter compartment lid catch and remove the lid.

2. Remove the exhaust air ﬁ lter by pulling it down and out of

the ﬁ lter compartment.

3. Tap out the contents of the exhaust air ﬁ lter over a dustbin

and brush off the loose dirt. Wipe down the dust container

using a damp cloth.

4. If necessary, thoroughly rinse the exhaust air ﬁ lter using

clear, lukewarm water. CAUTION: Do not under any cir-

cumstances clean the ﬁ lter in a washing machine or

dishwasher! Then shake off any excess water and allow

the ﬁ lter to dry completely in the air before reinserting it.

5. When all parts are dry, insert the exhaust air ﬁ lter in the ﬁ lter compartment.

6. Place the ﬁ lter compartment lid onto the exhaust ﬁ lter compartment. It must engage

audibly.

Storage

• You can hook the ﬂ oor nozzle into the bracket on the back of the device for convenient

storage and push the telescoping tube together as far as possible.

• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for children

and animals.

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part,

please contact our customer service centre. For your own safety, do not perform any

repairs yourself. The following table gives you tips on how to resolve minor problems

yourself.

Problem Potential cause/solution/tips

The vacuum

cleaner has no

suction power.

• Is the mains plug not correctly connected with the socket?

Correct the position of the mains plug.

• Is the socket defective? Try another socket.

• Check the fuse for your mains connection.

• Are the ﬁ lters plugged? Clean the dust and exhaust ﬁ lter.