Operation Manual

29
3. The foam fi lter is located in the motor unit. Remove it and
tap out the contents of the fi lter over a dustbin and brush
off the loose dirt. As required, you may rinse the foam fi l-
ter using clear, lukewarm water. CAUTION: Never clean
the foam fi lter in a washing machine or dishwasher!
Then press out the fi lter and allow it to dry completely in
the air before reinserting it in the motor unit.
4. The dust fi lter is located in the dust container lid. Open the
dust container lid by releasing the catch on the handle
and fl ipping up the lid.
5. Remove the dust fi lter for cleaning. Tap out the contents
of the dust fi lter over a dustbin and brush off the loose dirt.
Never clean the dust fi lter with water!
6. Place the dust fi lter back in the dust container lid. Close the dust container lid. Make
sure that the latch on the dust container lid is locked in place correctly.
7. Place the dust container into the device: Hold it by the handle and place the bot-
tom of the container into the device fi rst. Then push the handle against the device
housing until the dust container is heard to lock in place. Hold the device by the
handle and lift it to check that the dust container is in the correct position.