Operation Manual

Cleaning the housing and nozzles

1. If needed, clean the housing with a damp, soft cloth. Then dry it with a soft cloth.

2. Regularly remove hairs and lint from the nozzles.

Storage

• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for chil-

dren.

• If not in use, you can attach the tile and brush nozzle to

the bracket provided on the handle as shown.

• For convenient storage, you can push the telescoping

tube all the way together and push the hook (E) on the

ﬂ oor nozzle into the bracket (F) on the carrying handle.

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part,

please contact our customer service. For your own safety, do not perform any repairs

yourself.

The following table gives you tips on how to resolve minor problems yourself.

Problem Potential cause/solution/tips

The vacuum cleaner has no

suction power.

• Is the mains plug properly connected with the

socket? Correct the position of the mains plug.

• Is the socket defective? Try another socket.

• Check the fuse for your mains connection.

The suction power is weak.

• Is the auxiliary air valve on the handle open? Close

the valve.

• Is the dust bin too full? Empty the bin.

• Are one or both ﬁ lters heavily laden with dirt?

Clean the ﬁ lter(s).

• Is the attached nozzle, telescoping tube or suction

tube plugged? Turn the device off, pull the mains

plug out of the socket and remove the blockage.