Operation Manual

EN 26
Connecting the Suction Hose to the Telescopic Tube
1. Slide the end of the suction hose with the exhaust air
valve onto the end of the telescopic tube with the wider
diameter.
2. To remove the suction hose from the telescopic tube, sim-
ply pull off the suction hose.
Placing the Nozzle onto the Telescopic Tube
CAUTION!
■ Always switch off the vacuum cleaner fi rst before changing the nozzles.
The nozzles can be attached either to the telescopic tube or directly to the handle.
• Select a nozzle attachment and plug it onto the end of the telescopic tube with the
narrower diameter. To change the nozzle attachment, pull off the nozzle attachment
and plug a new nozzle attachment onto the telescopic tube. The following nozzle
attachments are available to you:
Floor nozzle
The combi fl oor nozzle is suitable for both carpets and
hard fl oors.
The foot switch allows you to change between carpet and
hard fl oor. A brush and a rubber lip are extended on the
underside of the nozzle for use on hard fl oors.
Crevice and Brush Nozzle
The crevice nozzle is suitable for upholstery, cleaning the
inside of cars and for all nooks and crannies that cannot
be reached with the other nozzles.
The brush nozzle is suitable for all uneven objects,
furniture, lamps, profi les and skirting boards, window
ledges, etc.
There is an arrow mark on the crevice nozzle. To
turn the crevice nozzle into a brush nozzle, all you
have to do is fold the end of the crevice nozzle in
the direction marked by the arrow.
Upholstery Nozzle
The upholstery nozzle is suitable for cleaning all kinds of
upholstery, e. g. sofas, car seats etc.