Operation Manual

5. Once all parts are dry, place the exhaust ﬁ lter back into the ﬁ lter compartment.

6. Fit the compartment cover again and press it down until it engages audibly.

• The other exhaust ﬁ lter is located beneath the dust container.

1. Push the release button on the dust bin and pull it out of

the device by the handle.

2. Remove the exhaust ﬁ lter from the compartment.

3. Tap the exhaust ﬁ lter out over a garbage bin and brush off

any loose dirt. If necessary, wipe out the compartment with

a damp cloth.

4. If necessary, rinse out the exhaust ﬁ lter thoroughly with clean, lukewarm water.

ATTENTION: Do not in any case clean the ﬁ lter in the washing machine or dish-

washer! Then shake off any remaining water and let the ﬁ lter air dry completely

before reinstalling it.

Cleaning turbo nozzle

1. To make it easy to clean the turbo nozzle, you can open

the nozzle: To do this, twist the ring on the end piece of the

nozzle anticlockwise.

2. Carefully take off the top housing part. Now you can

remove hair, dust etc. from the brush.

3. After cleaning, put the nozzle back together again and turn

the ring in the clockwise direction until it clicks audibly into

place.

Cleaning the animal hair ﬂ oor nozzle

1. Open the cover by pushing the two release buttons on

both sides of the cover and ﬂ ip it open.

2. You can now remove hair, dust etc. from the brush.

3. After cleaning, close the cover. It has to click audibly into

place.

Storage

• You can push the telescoping tube together as far as possible and hook the ﬂ oor

nozzle into the bracket on the back of the device for convenient storage.

• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for

children and animals.