Instructions

21 EN

■ Before using the device, always check the ﬂ oor cloth for signs of wear. A ﬂ oor cloth

that is worn or has holes in it must not be used. The ﬂ ooring could be damaged.

■ If the device is parked after use, a wet spot may form beneath the cleaning foot.

With sensitive ﬂ oors, a cloth should therefore be placed beneath the cleaning

foot or parking for a prolonged period of time should be avoided.

1. Give the ﬂ oor a sweep and / or vacuum before using the device.

2. Assemble the device (see the “Assembly” chapter and “Functions of the Attach-

ments”).

3. Fill the water tank (11) (see the “Filling the Water Tank” chapter).

4. To unwind the mains cable, pull out the upper hook for winding up the cable (2) a little

and turn it down.

5. Place the device upright and tilt the frame (6) forwards towards the cleaning foot (9)

until the joint of the cleaning foot engages.

6. Plug the mains plug into a properly installed, easily accessible plug socket.

7. Move the On / Oﬀ switch (13) to position I. The control lamps (8) behind the water

tank light up red as soon as the operating voltage is present. Wait until the device has

reached operating temperature and the control lamps light up blue. Steam begins to

emerge from the cleaning foot.

8. Hold the device securely by the handle and tilt it backwards slightly to release the

locking mechanism in the joint of the cleaning foot. If necessary, hold the cleaning

foot with your own foot as you do this.

9. Guide the cleaning foot slowly back and forth over the ﬂ oor. The ﬂ oor is cleaned as

you do this.

The frame has an additional articulated joint (4) which allows cleaning under items

of furniture. To do this, press the PUSH button on the articulated joint to release

the locking mechanism

(Picture B). To return the handle rod to its initial position,

pull it up until the articulated joint engages.

10. After use, move the On / Oﬀ switch to position 0 and pull the mains plug out of the

plug socket.

Use as Handheld Steam Cleaner

PLEASE NOTE!

■ WARNING – Danger of Scalding! Never attempt to smooth clothing on people!

Hang clothing on a hanger with suﬃ cient clearance on all sides so that heat and

moisture cannot cause any damage to any living creatures or objects.

1. Assemble the device (see the “Assembly” chapter and “Functions of the Attach-

ments”).

2. Fill the water tank (11) (see the “Filling the Water Tank” chapter).

3. Plug the mains plug into a properly installed, easily accessible plug socket.

4. Move the On / Oﬀ switch (13) to position I. The control lamps (8) behind the water

tank light up red as soon as the operating voltage is present. Wait until the device has

reached operating temperature and the control lamps light up blue. Steam begins to

emerge from the attachment.

01123_01345_Inlay_DE-EN-FR-NL_A5_V3.indb 2101123_01345_Inlay_DE-EN-FR-NL_A5_V3.indb 21 15.08.2019 16:20:0715.08.2019 16:20:07