CLEANMAX OPERATING INSTRUCTIONS FOR C LEAN M AX PRO SERIES UPRIGHT VACUUMS MODELS : CMP-3QD CMP-3T CMP-3N Before operating the vacuum, please read these instructions completely.
Index Important Safety Instructions................................................................................................................................................ 2 Grounding Instructions. ............................................................................................................................................................ 3 Parts Identification. .............................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE he manufacturer cannot accept responsibility for damage IMPORTANT: Tcaused when the appliance is not used according to the instructions, or for uses other than those for which it was intended. WARNING: To reduce the risk of fire, electric shock or injury: •D o not leave appliance when plugged in.
Grounding Instructions This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Parts Identification Model CMP-3QD Handle grip Cord retainer Hose hanger Hose handle Handle tube Cord storage hook Cord lock Full bag indicator On/Off switch Bag compartment cover latch Quick Draw wand Easy-carry handle Accessory attachment opening Bag compartment Tools Quick cord release Quick clean-out port Nozzle hose Furniture guard Self-adjusting nozzle Thermal reset button Thermal reset instructions Replacement Bags and Filters •G enuine CleanMax Vacuum Paper Bags Part # CMP-12 (12 per p
Parts Identification Models CMP-3T and CMP-3N Cord retainer Cord lock Handle tube Cord storage hook On/Off switch Bag compartment cover latch Easy-carry handle Accessory attachment opening Bag compartment Tools (CMP-3Tonly) Nozzle hose Nozzle hose Furniture guard Self-adjusting nozzle Thermal reset button Thermal reset instructions Replacement Bags and Filters •G enuine CleanMax Vacuum Paper Bags Part # CMP-12 (12 per package) •G enuine CleanMax Vacuum HEPA Media Bags Part # CMH-6 (6 per pa
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner The vacuum cleaner and the handle are packed separately. 1. Remove the handle screw, insert handle into the hole on top of the vacuum cleaner (Fig. 1). 2. Line up the small hole on the handle with the small hole on the vacuum cleaner, and insert the screw. Make sure the screw is tightened securely. How to Attach the Extension Power Cord to the Cord Lock 1.
How to Change the Vacuum Bag Always operate the vacuum cleaner with a vacuum bag installed. Bags should be changed when they are 2/3 full. To Change the Vacuum Bag 1. Unplug the vacuum cleaner. Remove the bag compartment cover, and remove the used bag from the bag holder (Fig. 1). 2. Attach the new vacuum bag onto the bag holder (Fig. 2). 3. Pull the bottom corners of the new vacuum bag (Fig. 3). 4.
Handle Adjustments The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low. How to Adjust the Handle 1. To release the handle, step on the on the left rear corner of the vacuum cleaner nozzle (Fig. 1). 2. Upright position – when cleaning tools are being used or for storage (Fig. 2). Handle locks in this position. 3. Middle position – for normal cleaning (Fig. 3). 4. Low position – for cleaning under furniture (Fig. 4). Fig. 1 Fig. 2 Fig. 3 Fig.
On-Board Tool Cleaning Model: CMP-3QD This model is equipped with on-board cleaning tools including a metal telescopic Quick Draw wand, stretch hose, upholstery tool and crevice tool. 1. To use the cleaning tools, lift the hose handle straight up from the vacuum (Fig. 1). 2. Extend the wand by pulling the button back and pushing the end of the wand forward (Fig. 2). 3. Attach any of the on-board tools to the end of the wand or directly onto the hose handle.
How to Replace the Vacuum Belt CAUTION: Unplug the vacuum cleaner before performing any of these steps. How to Remove the Bottom Plate 1. Place the vacuum cleaner in the low position by pressing the foot pedal release twice while reclining the handle. Turn the vacuum over. 2. Remove the two screws holding the bottom plate in place (Fig. 1). 3. Remove the bottom plate. How to Replace the Belt 1. Turn the vacuum cleaner over and remove the bottom plate as described in the above section. 2.
How to Clean the Nozzle Hose CAUTION: Unplug the vacuum cleaner before performing any of these steps. The nozzle hose carries the dirt from the nozzle to the vacuum bag. If the hose should become clogged: Model: CMP-3QD 1. Remove the wand from the wand/hose holder. 2. Squeeze the tabs on both sides of the quick clean-out port and pull away from the vacuum (Fig. 1). 3. Check above and below the port opening for obstructions. 4. Remove any obstructions. 5.
Thermal Fuse Protection This vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. The thermal protector is designed to protect the vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off the vacuum cleaner to avoid any potential damage. To Reset the Thermal Fuse 1. Unplug the vacuum cleaner. 2.
Warranty What Is Covered: This warranty covers any defects in material and workmanship in your new vacuum. How Long Coverage Lasts: Warranty coverage for the vacuum lasts one year. What Is Not Covered: • Damage to the vacuum that occurs from neglect, abuse, alterations, accident, misuse or improper maintenance. • Normal replacement items: disposable vacuum bags, disposable filters and belts.
CLEANMAX CleanMax Vacuum Cleaners PO Box 730 Fenton, MO 63026 cleanmaxvacuums.com ©2019 CleanMax Vacuum Cleaners.
