Manualshelf

Product Manual

ManualsBrandsCleanMaster ManualsAutomotive200 30-Gallon Solvent Parts Washer with Soak Tank
12345678
7578 Page 3 11-01-12
ECN 3783
A. Important Safety Instructions
1. Read all instructions.
2. Care must be taken as burns can occur from touching hot parts.
3. Do not operate equipment with a damaged cord or if the equipment has been dropped or
damaged – until it has been examined by a qualified service person.
4. If an extension cord is necessary, a cord with a current rating equal to or more than that of the
equipment should be used. Cords rated for less current than the equipment may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled.
5. Always unplug equipment from electrical outlet when not in use. Never use the cord to pull the
plug from the outlet. Grasp plug and pull to disconnect.
6. To reduce the risk of fire, do NOT operate equipment in the vicinity of open containers of
flammable liquids (gasoline).
7. To reduce the risk of electric shock, do NOT use on wet surfaces or expose to rain.
8. Use only as described in this manual. Use only manufacturer’s recommended attachments.
9. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses,
they are not safety glasses.
10. Do NOT operate any electrical equipment inside sink or vat.
11. Do NOT use light bulbs rated over 40 watts.
12. Do NOT smoke, eat or drink in the work area.
13. Do NOT modify these machines.
14. Do NOT operate this unit in any manner that will cause splashing or cause mist to form.
15. Use only the solvent provided.
16. Adjust flexible nozzle or flow-thru brush so solvent is directed to inside the sink only.
17. On the Control box, set the breaker switches to OFF before plugging in unit.
18. In any emergency, turn off the unit.
19. These parts washers employ a safety feature called a fusible link that holds the cover open during
use. Do NOT modify, alter, or obstruct the operation of the fusible link.
20. Keep cover closed whenever unit is not in use.
21. Do NOT remove fluid from this equipment or it may cause malfunction or unsafe conditions.
SAVE THESE INSTRUCTIONS