Specifications

Installer's Manual: Clean Burn Air Compressors
3-3
ITEM QTY PART# DESCRIPTION
1 1 32280 1/8" ELBOW 90°
2 1 32234 HOSE BARB (3/8" H x 1/8"NPT)
3 1 54063 AIR HOSE (3/8",42" LONG)
4 1 32236 HOSE BARB(3/8"H x 1/4" NPT)
5 1 32233 BRASS STREET TEE (1/4" NPT)
6 1 32146 RELIEF VALVE
7 1 32091 HOSE CLAMP
8 1 13063 AIR HOSE (3/8" ID, 3" LONG)
9 1 32147 PIPE ADAPTER (1/2" x 3/8")
10 32157 MUFFLER
11 4 34092 1/4−20 NUT
12 1 12177 POWER CABLE
13 1 32518 AIR COMPRESSOR− DUAL PISTON (75R)
14 1 32210 1/4 BRASS STREET ELBOW
15 1 32150 1/4 BRASS NIPPLE
16 1 32411 1/4NPT F TO 3/8NPS BULKHEAD FITTING
17 1 70341 BASE PLATE
18 1 32412 3/8 NPS BULKHEAD NUT
19 1 32409 FILTER ELEMENT
20 1 N/A PART OF 32409
21 1 21130 FILTER HOUSING
22 1 34182 1/4" VINYL WASHER
23 1 34181 1/4" WING NUT
24 4 31104 VIBRATION INSULATOR
25 2 21075 "U" BOLT
26 1 25120 MOUNTING PLATE
1
29 1 21180 ELECTRICAL BOX COVER
28 1 33383 CAPACITOR
27 1 21179 ELECTRICAL BOX
30 4 34009 3/8−16 NUT
1. Refer to Figure 3A.
2. Install the air intake filter in the inlet port on the compressor head (notice the directional arrow).
3. Install the 1/4" street tee in the outlet port of the compressor head (notice the directional arrow).
4. Install the relief valve on the street tee.
5. Install the hose clamp and 3/8" x 3" air hose. Then install the 3/8" x 1/2" bushing and muffler on
the relief valve.
6. Leave the hose clamp loose to allow for initial adjustment of the relief valve (Section 4).
7. Install the 3/8" H x 1/4" NPT hose barb on the street tee.
Installing the Air Compressor Components