Specifications

Mnl50005 (02-03) 4

OPERATION

MACHINE COMPONENTS

1. Recovery Tank

2. Solution Tank

3. Recovery Tank Lid

4. Solution Tank Lid

5. Star Assembly

6. Power Cord Connector

7. Solution Tank Coupler to Base

8. Squeegee connection loop

9. Recovery Tank Drain

10. Solution Hose Connector

MACHINE SETUP

1. Carefully check carton for signs of damage.

Report damages at once to carrier. The machine

is shipped fully assembled and is ready for use.

2. Attach head appropriate for surface to be cleaned

(Figure1). Spindle has a left hand thread. Turn

counterclockwise when installing.

3. Using a clean bucket or hose, fill solution tank

with 45 liters (12 gallons) of hot water, 60° C

(140° F) maximum.

Note: Before installing carpet cleaning head, refer

to page 9 for lubrication instructions.

WARNING: Flammable materials can cause an

explosion or fire. Do not use flammable materials

in tank(s).

4. Add a recommended cleaning chemical.

FOR SAFETY: When using machine, follow

mixing and handling instructions on chemical

containers.

5. To clean, lower head by depressing lever behind

large right wheel (Figure 2). When transporting

machine, raise head again by lifting handle in

front of head.

Fig. 1

Fig. 2