Owner`s manual

Page 2 RX Express III
CleanMaster,
a Division of HydraMaster Corporation
1/10/00
TO PREPARE...
Carefully remove the unit from its shipping container and inspect for damage.
If damage from shipping has occurred, notify the carrier immediately.
The unit may come partially disassembled. Please refer to the exploded view for
a proper tank configuration. Remove the solid shipping plug from the top of the
gearbox and replace it with the vented plug provided.
If there is any evidence of oil on any of the packaging material, or in the machine
itself, it may have come from the gearbox of the unit. Check the oil level of the
gearbox prior to the operation of the unit.
Important: Remove the solid shipping plug from the top of the gearbox and replace
it with the vented plug provided before operating the machine.
PRECAUTIONS
1. To avoid hazardous conditions, do not use your machine in areas
where flammable and/or explosive vapors or dust are present.
2. Connect only to a grounded (3 wire) outlet.
See illustration.
To reduce risk of electrical shock, use the equip-
ment indoors or contained within a vehicle (i.e.
service van). Do not expose the machine to
weather.
GROUNDING INSTRUCTIONS:
The RX-Express should be grounded while in use to protect the technician from elec-
trical shock. The power cords are equipped with suitable three conductor plugs. If
grounded outlets are not available, use three way adapters (see Figure B).
Preparation and
Precautions
WARNING
!