Specifications

RX-Express
Page 7
Automatic Scrubber Option -
THE KIT INCLUDES
One (1) Squeegee Attachment (mounting hardware included)
One (1) Trailer Hook
One (1) Pad Driver Head or Brush Head Assembly
One (1) Head Removal Wrench
INSTALLATION INSTRUCTIONS
1.
2.
3.
4.
5.
Remove the tanks. Place the machine on its right side and
remove the standard cleaning head.
Thread on the cleaning head of your choice. Make sure that
it mounts counter-clockwise. If you are using the pad driver
head, select the proper pad for the application.
Attach the saueeuee assemblv to the rear of the
,-
machine as seen below.
-+’
o
u
&
Crossbar
Cable
Retainer
With the machine in its upright (cleaning) position,
hook the cable retainer over the crossbar to
“disengage” the squeegee.
Replace the tanks.
Add the appropriate solution.
\
Lower the head onto the floor surface and turn on
Squeegee Assy
the head and vacuum switches.
IMPORTANT: DO NOT turn on the pump switch. Use the push button to
control the flow of solution.
To resume carpet cleaning capabilities, remove the pad driver head with the
wrench provided.
Place the tip of the wrench into the holes in the pad and
rotate in a clockwise direction.
t
CleanMaster Corporation
7/18/95