Specifications

RX-Express
Page 4
CONTROLS
There are four switches installed in the dash box located
Two are for the VACUUM PUMP and CLEANING HEAD.
switches: 1. Automatic, and 2. Manual application of
MANEUVERABILITY
The ease of handling the RX-Express is a direct
result of the rotary extractor head. Its natural
cleaning motion provides the “drive” for the
unit.
The slightest push or pull against the
foam handle provides ample effort in guiding
the RX-Express through its cleaning paces.
Pivoting on its large front tires and the swivel
casters in the rear allow the RX-Express to
glide in and out of tight spaces and turn on a
dime.
CLEANING PATTERN
Operation
on the main handle assembly.
The SOLUTION PUMP has two
solution.
B3ckward ~
Movement
~ Forward
Movement
To achieve maximum results from your unit, it is recommended that you clean in a
back-and-forth motion while overlapping each cleaning pass by fifty percent. The
more soiled the area to be cleaned, the slower the speed of the cleaning passes. This
allows the machine more time to work. After cleaning an area approximately six feet
square, turn off the solution switch and make vacuum-only “dry passes” over the area
to assure maximum water removal and a faster drying time.
(,--–——————~
\
“p..——— ~__
-+1
CleanMaster Corporation
7/18/95