Specifications

RX-Express
Page 14
6.
Remake wire connections with new wire nuts.
7.
Re-install in reverse order.
Removal of Fiow Control Valve:
1. Disconnect machine from power source.
2. Evacuate all water from unit.
3. Disconnect %” and
3/8” hoses attached to valve.
4.
Remove male quick connect from top of frame.
5. Remove %” elbow behind quick connect.
6. Disconnect wires.
7.
Lift complete valve assembly from unit.
Removal of Cleaning Head / Pivot Frame Assembly:
1.
Disconnect machine from power source.
2. Remove vacuum hose attached to front of head.
3. Remove hose attached to rotary union.
4. Disconnect wires at rear of motor.
5. Remove control link from rear of shaft.
6. Loosen two (2) set screws in pivot bearing.
7.
Remove spring from lifting mechanism.
8, Pull head forward to disengage from frame.
...
CleanMaster Corporation
7/18/95