Installation Guide

SINK LEVEL

1. Sink

2. Arms

3. Hose hanger

4. Draining hose

5. Screw & Plugs

4 long screws

4 Short screws

4 Plugs

6. Hole Template

1. Sign the Sink height 2. Put the top line of the template

on the sign

3. Use spirit level to keep the

template straight

4. Sign the 4 holes 5. Have 4 drills

6. Insert 4 Plug - Use Hammer 7. Remove the 2 Arms from

bottom of the sink

8. Connect the 2 arms to the wall

- Use 4 long screws

9. Put the sink on the 2 Arms -

Be sure the arms inserted to

their place

10. Connect the Sink to the arma

with 4 screws (Short)

11. Insert the draining hose end

to Boiling water for a minuite

12. Insert the draining hose end

to the draining outlet.

13. Connect the Hose hanger

IMPORTANT:

TO INSERT THE DRAINING HOSE YOU MUST USE

BOILING WATER (FIG. 11)

Outdoor Water Stations

Driling hole template & Assembly instructions