Installation Manual

CONDENSATE PUMP INSTALLATION
IO-DV090 IO-DV090
WWW.CLEANCOMFORT.COM
17
Step 1. Lay the DV090 unit on it's side. Make sure
the lter door is facing upward. Note the locaons of
the four leveling feet and the hose adaptor.
Step 2. Parally screw in the leveling feet at the four
locaons.
Step 3. Hand ghten the hose adaptor to get the
threads started. Turn clockwise.
Step 4. Use adjustable pliers to nish ghtening.
Fully seat the drain adaptor so that no leaks occur.
Step 5. Install a suciently long drain hose to connect
the drain adaptor of the dehumidier to the condensate
pump reservoir using eld-supplied ngs.
Step 6. Aach a drain hose to the condensate pump
and route it to a oor drain.
Step 7. Use a level to ensure the dehumidier is
level before powering up the dehumidier and the
condensate pump.
Step 8. Plug in the condensate pump and the
assembly is completed.
Annual inspection of a properly
functioning pump is necessary.
CONDENSATE PUMP INSTALLATION
A condensate pump must be installed with leveling feet.
Do not use casters.
Depending on the specic model you have purchased,
the base of the humidier may look dierent than shown in the pictures below.