User's Manual

There is no part for the user to self-repair in the mobile phone. If you doubt that the mobile
phone is damaged, please rapidly send it to the designated service and maintenance center to be
maintained by the qualified technical personnel. Never disassemble the mobile phone by yourself,
otherwise you may suffer from electric shock or other injuries.
Never let the children to use the mobile phone or its fittings. The improper operation of the
children may damage the mobile phone or its fittings or cause injuries to yourself or others. At the
same time, the removable parts of the mobile phone such as SIM card, memory card, etc. may be
swallowed by the children to cause the danger.
When using the mobile phone, keep the mobile phone away from high temperature and avoid
solarization. Please keep it in the dry and cool place.
Attentions:
1. Before waterproof test, tightly close each position of the battery cover so as to avoid water
leakage.
2. As the USB seat, the earphone seat and the charger seat of the machine belong to waterproof
devices, the machine needs to be dried and placed for a period of time after waterproof test and
only can be used after there is no water in the earphone seat, the USB seat and the charger seat.
1. Introduction
1.1 Insertion and removal of SIM Card
Turn off the phone, open the left upper cover. With a thimble inserted the card slot inside the
round hole. Remove the card seat. Fit SIM card to the SIM seat, with the metal surface downward
and the edge and corner of the card fitting with the card slot. Slide the SIM card buckle to the right
place and then press it down to fix the card. If you need to take out SIM card, please turn off the
phone first, remove the external power source, remove the rear cover, slide the SIM card buckle to
right place and then release it upward, and at last remove SIM card lightly.
Tips: SIM does not support hot plug. Do not remove SIM in standby mode for fear of
damaging SIM card.
1.2 Insertion and removal of Memory Card
Turn off the phone, open the left upper cover. With a thimble inserted the card slot inside the
round hole. Remove the card seat. Fit memory card to the card seat, with the metal surface
downward and the edge and corner of the card fitting with the card slot. Slide the memory card
buckle to the right place and then press it down to fix the card.
Before removing the memory card, turn off the phone first, and then remove the card seat of the
phone.
Tips: This phone does not support memory card hot plug.
1.3 Remove and install the battery
The battery is built-in.
Note: the battery of the phone cannot be removed manually.