Coach PLUS Brand Name: plum Model Name: Z620 FCC ID: Y7WPLUMZ620
Content Content ............................................................................................................................................. 1 1Introduction ................................................................................................................................... 3 1.1 Acknowledgement ............................................................................................................. 3 1.2 Announcements ......................................................
8 Other Application Procedures................................................................................................... 61 8.1 Clock................................................................................................................................. 61 8.2 Calculator ........................................................................................................................ 61 8.3 File Manager .................................................................................
read this manual carefully before your operation. 1.2 Announcements Preventive maintainance Please always keep the MID dry. To avoid the device short trouble, corrosion fault and electric short, please prevent the device, battery and charger from water and moisture, and don’t operate the device or charger by wet hand. To avoid failure of device, battery and charger, please prevent the device, battery, charger from violent shock or shake.
Protect the MID and accessories from kids reach scope, and avoid the kids to use the MID without parents’ supervision. Please comply with related rules and regulations, and respect others’privacyand legal rights while using the MID. Please strictly adhere to related instructions in the manual when using USB cable to ensure the safety of the MID or PC. Never use the MID in bathroom or other humid environment, and please protect the MID from liquid wash or wet. 1.
2 MID Introduction 2.1 MID Operation and Preparation Battery Charging If this navigator is first used, please use AV adaptor to fully charge it. 1. Apply the power adptor to charge for MID. 2.2 MID Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window through clicking the column to slide up.
Reminder board Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.
3 Quick Start Guide 3.1 Keys Function Keys Funcction Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume Click it in any interface will return to main interface. HOME button （home） Back button（back） Menu button Setting button click it in any interface will return to previous menu This button will display in menu interface. display recently browsed history 3.
power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon to unlock the screen. Picture 3.1 3.4 Usage of Touch Screen MID operating methods There are below methods to view the main screen, menu and application procedure in your MID.
For most pictures, you only need to retate the MID sidewise to change the screen direction from horizoncial to vertical. For instance, when you are typing wods, and watching movies. 3.5 Home Page Main interface as below picture 3.2, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut.
Batty volume Notice column time Picture3.2 The extended home page The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen. In the home page, there are two extended pictures, as Picture 3.3.
Picture 3.3 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.4. 2. Then click the overlayed icons, the applications can be folded, as Picture 3.5. Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similiar with Apple IOS system), the icons position can be changed through long press. Picture 3.
Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper.
3.6 Visit Application Procedures in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Click Picture 3.6 3.7 USB Connection MID storage configuration Before transmitting documents, you have to conduct storage configuration for your MID: 1. Connect the MID and computer by USB cable, the reminder column will show the remind information. 2. Open the reminder board; please view the MID status and reminder to learn how to open the board. 3.
Picture 3.7 Copy the document into memory card 1. Connect the MID to computer with USB cable. 2. As MID storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “removable disc”. 4. Copy the documents you need into “removable disc”. 5. After copying finishes, click “shutdown the USB storage configuration” touninstall.
3. In the text setting area will reveal all the installed words-typing methods in your MID. 4. Tick the typing method you want. Use and switch of input method ① ⑤ ② ④ Picture 3.8 ③ 3 1 switch the capital and small letter 2 switch the mode of number input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left og the cursor.
3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 SIM Management 4.1-1 Voice call Click settings in main menu, choose SIM Management, as Picture 4.1 Picture 4.1 Click voice call, choose defaulted SIM card, as Picture 4.
Picture 4.2 4.1-2 Video Call Click settings in main menu, choose SIM Management, and click video call, choose defaulted SIM card when makes video call, as Picture 4.3 Picture 4.3 4.1-3 Message Click settings in main menu, choose SIM Management, click message, choose the defaulted SIM card when sends message, as Picture 4.4 Picture 4.4 4.1-4 Data Connection Click setting application in main menu, choose SIM management, click data connection, choose the defaulted SIM card, as Picture 4.
Picture 4.5 4.2 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, MID will automatically search theavailable Wifi wireless internet. As Picture 4.6 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect. Picture 4.6 2.
1) Click icon in right top, as Picture 4.7 Picture 4.7 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.8 Picture 4.8 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.6 4. Keep WI-FI on during sleep.. 1. Click icon in right top of Picture 4.8, select advanced. 2. Click Keep WI-FI on during sleep, as Picture 4.
Picture 4.9 4.3 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click bluetooth and open it. 3. If somebody open bluetooth in your surroudings, click search device in right above, then MID will automatically search the bluetooth device nearby. As picture 4.
Picture 4.10 4. Click the availableBluetooth device, it will popup request window, enter into related password, and match the device to connect. 5. After match successfully, choose the operation you want to, click to enter into Picture 4.11. Picture 4.11 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.10, as Picture 4.12, select rename tablet, you can rename it as you want Picture 4.12 2. Check visibility timeout Selectvisibility timeout setting in Picture 4.
Picture 4.13 3 Display the file you received Choose display the file you received in Picture 4.12, you can view download and upload files. 4.4 Data Usage Check SIM card data usage, as Picture 4.15 Picture 4.
Click icon in right top of Picture 4.15, click Data Usage, as Picture 4.16 Picture 4.16 4.5 More 4.5-1 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.5-2 VPN Open VPN, click add VPN network, as Picture 4.17. Input name and server address, then save.
Picture 4.17 Click VPN, as Picture 4.18, input VPN user name and password, click connect. Picture 4.18 4.5-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more when wifi is well connected, open network share and portable hotspot Picture 4.
Picture 4.20 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable WLAN hotspots, click configure WI-FI hotspots. Picture 4.21 5. Set passwords you want to, password should be more than 8 numbers. 4.5-4 Mobile Networks 1. 3G service Click 3G service, as Picture 4.22, choose available defaulted SIM card, GSM is 2G network, WCDMA is 3G network.
Picture 4.22 2. Access Point Name( APN) Click mobile network, as Picture 4.23 Picture 4.23 Choose access points name (APN), choose SIM card you need to connect, Choose connect type, as Picture 4.
Picture 4.24 Remark: (CMWAP transmitters data through GPRS, the webpage it visit belongs to wap webpage, and CMNET support www browse mobile phone network, it can also log in webpage in computer. And the charges are also different.) 3. Network Operator Click network operator, choose SIM card you need to connect, system will search available GSM and WCDMA network, as Picture 4.25 Picture 4.25 4.5-5 GPRS data prior mode After Open GPRS data prior mode, systems willpriority chooses your network.
4.6 Contextual Model 1. Open settings, click contextual model, as Picture 4.26, Picture 4.26 2. Click standard to enter into Picture 4.27 Picture 4.27 1. Vibrate In picture 4.27, click vibrate, MID will vibrate when someone calls you. 2. Volume In picture 4.27, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.
Picture 4.28 3. Voice call Ringtone In picture 4.27, click voice call ringtone to choose voice call ringtone, as Picture 4.29 Picture 4.29 4. Video call ringtone In Picture 4.27, click video call ringtone to choose video call ringtone, as Picture 4.
Picture 4.30 (Note: Except standard, silent, meet, outdoor are only for selection, they can’t be set.) 4.7 Display 4.7-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portlito to adjust the brightness volume.As Picture 4.31 Picture 4.
4. Click OK after brightness is adjusted. 4.7-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—live wallpapers---gallery(user defined)---wallpapers (system defect)---video wallpaper, as Picture 4.32 Picture 4.32 4.7-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor. 4.7-4 Sleep 1. Click setting appliation. 2. Click display. 3. Click sleep. 4.
Picture 4.33 4.7-5 Font size Click font size to adjust the font size, as Picture 4.34 Picture 4.34 4.8 Storage Open setting function, click memory, click preferred install location, you can choose isntall new application to choose preferred install location. Check SD card and MID storage space. 1. Enter into setting application.
2. Click storage, check storage space. 1. Internal storage (1) System storage System storage is the spcae MID leave for system file, as Picture 4.38. it can’t be viewed. Picture 4.38 (2)Internal storage Internal storage is MID local NAND storage, as Picture 4.39, if you need to check the storage content, you can check it in main menu. Picture 4.
2. SD card You can check storage space, SD card available space, unmount SD card and erease SD card, as Picture 4.40 Picture 4.40 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.9 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.41 4.10 Application program 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application and check system used storage space and left space. (As Picture 4.42) Picture 4.42 3. View internal storage used space and left space, as Picture 4.
Picture 4.43 4. View the working device, used space and available space, as Picture 4.44 Picture 4.44 4.11 Account and Sync 1.
2. Click add an account, as Picture 4.46 Picture 4.46 4. After successfully load, it will open the sync function, as Picture 4.47 Picture 4.47 4.12 Location service Click setting, select location service, as Picture 4.
Picture 4.48 1. Google’s location service Open Google location service, you can use WIFI to positioning MID. 2. GPS satellites Open GPS satellite, you can use GPS to positioning MID. 3. GPS Assistance Open GPS Assistance, it can insrease the speed of GPS positioning, but you need to insert SIM card and use data transimission. 4. EPO setting Click EPO setting, enter into Picture 4.46, then check if EPO positioning information and EPO has turned on auto download.
Picture 4.49 5. Location and Google search Open location and allow google search, you can use your location information to improve search result and other services. 4.13 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click safe. 3. Click locked the screen. 4.
8. When you see the reminder, enter the unlock pattern, then click confirm. Picture 4.53 Set unlock PIN code 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Ener new PIN code again and click confirm. Set unlock password 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Set password in text seting area. 5.
Picture 4.54 Note: Manual installing APK files needs to turn on unknown source. 4.14 Language and Input Method Click setting, select language and input method, choose language to switch language, as Picture 4.55 Click setting, choose language and input, choose Android keyboard setting, click input language, as Picture 4.
Picture 4.56 Choose the language you want to change in the language list, as Picture 4.57 Picture 4.57 4.15 Backup and Reset Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. If you need to recovery factory reset, please click reset, as Picture 4.59, if you need to formulate NAND, please click reset tablet.
Picture 4.59 4.16 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.60 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.17 Fixed-time Startup and Shutdown 1. Click Setting application procedure 2. Click fixed-tine startup and shutdown. 3. Operate as below Picture 4.61 Turn on/off fixed-time startup Turn on/off fixed-time shutdown Picture 4.61 4.
4.18-1. Large size Click it to make system font large size 4.18-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.18-3. Touch and hold delay Click touch and hold delay to increae time, as Picture 4.62 Picture 4.62 4.18-4Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.19 Engineer Selection 4.
4.19-5 Show screen update If you open screen refresh, it will display related area when the area is refreshing. 4.19-6 Show CPU usage After open CUP usage, in the right top of MID will show CPU usage situation.as Picture 4.63 Picture 4.63 4.20 About Tablet Check MID state 1. Check Setting application. 2. Click about tablet, check state message, model, Android version, version No and so on. 3. Click state message, check battery state, battery volumne, SIM state, IMEI number, IP address.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music icon to enter into music player, click the music you want to play, as Picture 5.1: Picture 5.1 Random play Album Song name Pause/play Artist Album Picture 5.
Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.2 5.2 Video Enter video player: choose to play. Operation of video player button as Picture 5.3 application in main menu, choose the video you want Adjust play progress Play/pause Choose the screen mode Picture 5.3 5.3 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder.
Note: when you browse the pictures, slide left or right to view more pictures. Edit and set pictures When check the pictures in full screen mode, click menu key to display menu selection, you can choose the selection you need to edit and setting pictures. Slide Show 1. Open a picture, use virtual key to click menu key, display menu selection. 2. Click slide show, it will auto loop play(or choose button in picture folder) Crop 1. Click menu key to display menu selection. 2.
View the pictures and videos normalCamera mode Switch camera front/back Click it to take pictures camera shooting mode Full screen play mode. Picture 5.4 Sub menu 5.5 FM Radio in the main interface or desktop to enter into FM radio interface: Click Radio button operation instruction as Picture 5.5: Enter into channel list Exit FM Current frequency Save button Previous channel Next channel Picture 5.5 Click search to search FM band, as Picture 5.
Picture 5.6 Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your MID can’t search any frequency band. 6 Communication Function 6.1 Phone 1 Click Phone application procedure 2 Operate as Picture 6.
Call history contact 录 Display phone numbers The area of dial phone numbers Hide keypad Picture 6.
6.2 Text Message 1 Enter into main menu, choose application procedure. Menu(discard,insert text and settings) 2 Click“Edit new message” Directly input Add receiver phone number or name Attach some files Send message Picture 6.2 6.3 Contact List Click Contact list in the main interface, enter into the contact list as Picture 6.
Picture 6.3 Search contact: click Add contact: click button, enter into search function button, enter into add contact interface. 7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, asPicture 7.
menu Address column Save bookmark 57
Picture 7.1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.1.2 and you can click the menu you can refresh ,save to bookmarks,,share page,bookmarks,,history and setting the webpage. Picture7.1.2 7.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 7.
Picture 7.2 a. Email Setting 1． After you click the sending email icon , you can see the email setting guide, which can help you to set. 2． Input your email address and password. 3． Click “Next step” button, choose your email type is POP3 or IMAP. 4． Click “Next Step” button to check whether the email box servicer can receive or send emails 5． Input the email account and display the email subiject, and click finish. 6． If the email box is available, you will enter into your mail box automatically. b.
c. Send E-mail 1． Click to display your mail box. 2． Click the inbox, it will refresh the new emails automatically; click it to read new email. 3． Press Menu key. Menus will popup. 4． Click Edit to enter into new email editing interface. 5． Input the receiver’s email address. 6． Input the subject and email content. 7． If you want to add attachment, click menu key, the menu popup. 8． Click “Attach file” (photo,music, video,contacts). 9． Click “send” to send the email out.
9 Other Application Procedures 9.1 Clock Click Clock procedure, enter into below interface as Picture 9.1. There are clock, picture, music and homepage buttons. Set alarm Picture 9.1 9.2 Calculator 1. Click . 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer 9.2 9.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager. RAM External SD card Picture 9.
a、Paste the copy or cut file: choose the file you want to paste, Picture 9.5, choose right top icon to enter into Picture 9.6 Picture 9.4 Picture 9.5 C.
Picture 9.6 d、Install apk file：Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 9.4 Recorder In the main interface or desktop, click recorder icon to enter into record interface, click record key to play the recorded sound. The system to start record.
Picture 9.
10 Installation of Procedures 10.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 10.2 Uninstall Uninstall application procedure 1.
11 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. MID can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the MID and wireless router in certain distance, and no wall or other barrier between them. Ensure the user name and password both correct.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
or attachments could damage the phone and may violate FCC regulations. NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently: • Extend your antenna fully. • Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
Do not use the device with the environment which below minimum -10℃ or over maximum 50℃, the device may not work. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Ad Hoc function is supported but not able to operate on non-US frequencies.
