User's Manual

11
Chapter 3 Brief Introduction
3.1 Keypad introduction
3.1.1basic keys
 HOME key
Under the standby mode, press the key into the main menu
interface.under other interface,press the key into the standby
interface .
 Left soft key: confirm
 Right soft key: return
3.2Phone function
When the telecom’s logo appears on the screen, you can
make calls with your phone. The signal indicator on the top left
corner of the screen shows the strength of the signal (the signal
is in the best situation when there are six lines). The reception is
liable to the obstacles, so move around in a small area will be
helpful for the calling.
3.2.1Make a call
 Domestic calls:
Use the numerical keys or click the phone icon on the
bottom of the screen to input the phone number, and then press
the calling key to make a call. The right soft key is used to
delete the last digit of the number. Pressing and holding it for a
while will clear all the entry. After a call is established, the call
meter can be seen on the screen.
Press the ending key to end a call.
Area Code + Phone number + calling key
 Calling the ext. number：
Sometimes when you want to dial an ext. number, you need to
add the pause character “P” between the operator number and
the ext. number. Press and hold the * key, P will show on the
screen.
Area Code + Operator Number+ P+ ext. number
+calling Key