Mobile Phone Plum Model：Caliber User Manual English 1
Contents User Manual ----------------------------------------------------------------------------- 2 Contents ---------------------------------------------------------------------------------- 3 Safety and Maintenance------------------------------------------------------------- 5 Basic Knowledge -------------------------------------------------------------------- 10 BRIEF INTRODUCTION ..........................................................................
4.6 TEXT EDIT ..................................................................................... 24 4.7 BASIC ENGLISH AND NUMBER INPUT MODE ........................................ 25 4.8 QUIT FROM THE MENU .................................................................... 25 Menu Function List ----------------------------------------------------------------- 26 Menu Functions ---------------------------------------------------------------------- 28 6.1 PHONEBOOK .......................................
Safety and Maintenance While using the cell phone, please check it with the following table: • Before use, please read instruction manual carefully. • Do not power on the cell phone when use of cell phone is prohibited or it may cause interruption or danger. • Please keep your cell phone off when you are on a plane. If functions that will automatically power on your cell phone, such as alarm clock or calendar, are setup, please check and cancel the configuration before boarding the plane.
hospital and other special places according to specific regulations there. • Keep the cell phone away from mechanic vibration or shaking. Do not hit the screen of your phone with sharp tool. • If plastic cover or case is used for cell phone, surface coating may be damaged. • Do not disassemble the cell phone boldly. • Do not use benzene, thinner or alcohol to clean the cover of your cell phone. Keep your cell phone away from corrosive chemicals such as detergent.
While using battery, please observe following points: • Before use, please read instructions for use and as well as label on the surface of battery. • Please charge the battery in a cool and well-ventilated room. Otherwise, high environment temperature may lead to overheat, smoking, burning, distortion or even explosion of battery. • There are special protection circuits and devices inside battery, so do not open the battery; Otherwise it may lead to short circuit or electrolyte leak.
• Do not put the battery in places that are too hot or too cold. Temperature above 55℃ or below -10℃ may affect performance of the battery. • Do not put the battery in fire so as to avoid explosion. • Do not put the battery in water so as to avoid short circuit inside, resulting in battery overheat, smoking, distortion, damage or even explosion. • Treat battery according to local regulations (for example, recycling). Do not treat battery as domestic garbage so as to avoid explosion and pollution.
• When to pull out the plug, hold the charger instead of dragging the power cable so as to avoid damage of power cable. • Keep the charger out of reach of children so as to avoid danger.
Basic Knowledge Brief Introduction Thank you for choosing the GSM/WCDMA function cell phone. You will know how to use this phone roundly after reading the manual.
Your Mobile Phone 1.
1.2 Key description Key Description Send key Making or answering a call. In standby mode, press this key to access the Call History. End key End calls or reject calls. Long press: Power on, power off. In standby mode, press left soft key to enter main menu. Left soft key Right soft key Shortcut key OK key Number key * key # key 12 In standby mode, press right soft key to Phonebook. In standby mode, press the key to enter media player. Confirm operations you have operated.
1.3 State icons Indicates SIM Card signal strength. That is using 3G network of USIM. SIM card received new short message(s) New multimedia message(s) received. Received new emails Missed phone. Alarm clock has been activated. Indicate Bluetooth Indicates a headset is connected to the phone. Indicates vibration mode has been activated. Keypad has been locked. Indicates battery power level. 1.4 Screen background light Background light can illuminate the screen.
Instructions before Use 2.1 Install and charge the phone 1. Remove the battery cover 2. Insert the SIM card 3. Install the battery 4. Plug the travel adapter into the phone 2.2 Power on/off Long press the End Key to power on / off the phone. 2.3 Security password You can set access password to avoid your SIM card is used by others. 2.3.1 PIN code If your cell phone has enabled PIN code protection, there will be prompt for entering PIN code.
wrong input of PUK code amounts to ten times, SIM card will lose efficacy. PUK code is provided by network service operator.
Quick Guide 3.1 Dial numbers When logo of network provider appears on the screen, you can dial or answer calls. Information bars at upper right corner of the screen show intensity of network signal. (Four information bars represent most intense signal.) Since quality of call is greatly affected by barrier, movement in small range can effectively improve quality of call. 3.1.1 Make domestic phone call Use number keys to input phone number in standby state and then press send key to start the call.
Area code Send key Exchange number p Extension number 3.1.3 Make international Call To make an international call, press [*] key for international long-distance call appears on the screen You can enter international phone number according to following sequence: + Country code Complete phone number Send key After pre-fix, enter country code and complete phone number you want to dial. According to conventions, county code for Germany is 49, and 44 for UK and 46 for Sweden, etc.
namely missed, Received and Dialed. Phone number of the call you received most recently is located at the top of every list. When phone number list is full, old numbers will be deleted automatically. Operate as follows: Press Send key to view record of dialed numbers and press [Ok key] to view details of dialed calls. Phone numbers appear in the lists can be dialed directly by pressing Send key. 3.
3.4 Terminate call When there is an incoming call, press End key to reject the call. During the call, press End key to terminate current call. Call that has just been dialed can be cancelled by pressing End key. 3.5 Call options In talk state, press Left soft key “Options” to enter talk options. Operation method of talk options is the same as that of function menu. Talk options can only be seen in the process of talk, and functions such as call wait and multi-party talk have to be supported by network.
Background sound Open or close the function, and select different background sound. Mute Open or close Mute. DTMF Open or close DTMF. Swap * Switch between current talk and hold talk. Conference * Enter multi-party talk state. You can hold multi-party talk or terminate the call. Note: Menu items marked with * appear in specific conditions only. For example, “Swap” appears only when calls in talk state and hold state exist at the same time.
Basic Functions 4.1 Dial phone 4.1.1 Direct dial In standby state, press number keys to enter the telephone number you want to dial. If you input wrong number, press [right soft key] to delete the number before the cursor. Once phone number to dial has been input, press [Send key]. If the phone number being dialed out can be recognized by phonebook, name and icon of contact person will be displayed on dialing screen, and calling animation is displayed at the same time. Press end key to end a call. 4.1.
4.2 Answer incoming call When there is an incoming call, incoming call animation will be displayed together with special ringtone or vibration. If phone number of the caller can be recognized, the number will be displayed on incoming call screen. If information about the number is stored in contacts, caller’s name and icon will also be displayed. At the same time, specified ringtone will be played or play music or vibrate according to current settings.
4.4 Make international long-distance call Press [*] key before international phone number can be dialed. “+” sign tells the network you are making an international call. Input country code, area code (without 0) and phone number and then press [Send key]. Note: Some networks do not allow “+” for dialing international numbers. 4.5 Talk options The cell phone provides some talk control functions in the process of talk. Press [Options] soft key to access the talk control functions in the process of talk. 4.5.
If there is a second incoming call in the process of talk, the screen will display a second call is waiting. Call wait function is only available when the network supports this service and you have set to Enabled in Call wait menu. Press [Answer soft key] or [Send key] to answer second call. When the second call is put through, the first call will be switched to hold state. Press [End key] to terminate the second call. 4.5.
In edit state, press [#] key to select proper text input mode. This cell phone provides English capital/small letter, Number input modes, symbol and so on. Default input mode after power-on is smart ABC. Enter symbol through the [*] key. 4.7 Basic English and number input mode In Basic English input mode, you may press a key on the keyboard to enter a letter. In number input mode, press a number key on the keyboard to enter number. 4.
Menu Function List 5.1 Phonebook 5.2 Call History 5.2.1 Call history 5.2.2 Call history 5.3 Mobile Internet 5.4 Fun & Games 5.4.1 Entertainment 5.4.2 Games 5.4.3 Java 5.5 Messaging 5.6 Video call 5.7 Organizer 5.7.1 File manager 5.7.2 Calendar 5.7.3 Tasks 5.7.4 Alarm 5.7.5 World clock 5.7.6 Notes 5.7.7 PHB backup entries 5.8 Settings 5.8.1 Dual SIM switch 5.8.2 Dual SIM settings 5.8.3 User profiles 5.8.
5.8.5 Network settings 5.8.6 Security settings 5.8.7 Connectivity 5.8.8 Restore factory settings 5.8.9 Sound effects 5.9 Multimedia 5.9.1 Camcorder 5.9.2 Media player 5.9.3 FM radio 5.9.4 Image viewer 5.9.5 Photo editor 5.9.6 Sound recorder 5.9.7 Schedule FM record 5.9.8 Melody composer 5.9.9 Slide show 5.10 Email 5.11 My favorites 5.12 Extra 5.12.1 Calculator 5.12.2 Currency converter 5.12.3 Stopwatch 5.12.4 Ebook reader 5.13 MSN 5.14 eBuddy 5.
Menu Functions You can press left soft key in standby state to enter the main menu. Once you have entered the main menu, you can select corresponding options by using direction keys to move the cursor. When the cursor moves to an option, icon of the option will be highlighted in the original position with blue box. Stop the cursor on an option and press [OK] key to enter the function window of the option. You can also use short-cut method, i.e.
card and the phone. 8. Delete all contacts: Use the menu to delete records from the SIM card or phone. Note: This phone can store 1000 phone numbers. 6.2 Call history 6.2.1 Call history 1. SIM1/SIM2 call history Move the direction keys to view all calls, dialed, received or missed calls. In the missed、dialed、received calls interface, press [ok key] to view the details: type, time, number. Press options to operate the following: send message, call, delete, add to blacklist, edit, delete and advanced.
Divert the incoming calls to the other phone number. It have to be supported by network. Call barring: Use the menu to set the call barring. It contains outgoing calls, incoming calls, Cancel all, Change barring password. Line switching: You can change the line 1 or line 2. Closed user group: You can add or close your group. 2. Advance settings 1). Black list Activate blacklist mode and edit the blacklist numbers. You can’t receive the calls in the list. 2). Auto redial Open or close the function. 3).
8). Text phone It needs supports by some instrument. 6.3 Mobile Internet Home page: Connect to home page. Bookmarks: Enter bookmarks where have two bookmarks. Input Address: Input a web page Last web address: Enter the last web page. Recent Pages: Enter the history page. Stored pages: View stored pages. Service Inbox: Get the service message Settings: It contains select SIM card, profiles, browser options, preferences, security settings, service message settings and restore browser settings. 6.
network. 6.5 Messaging Enter the function, you can do the following: 1. Write Message In the edit mode, you can edit message or MMS, and press the [options] to operate the followings: Send to: Send the message by SIM1 or SIM2. Writing language: Select input language you want. Add picture: Add picture in the MMS from phone or memory card, and also you can take picture for the MMS. Add sound: Add sound from phone or memory card, and also you can record sound for the MMS.
The SMS and MMS you received are all stored in inbox. Open a SMS or MMS and press [options] key, you can call the sender, delete, copy or move the SMS or MMS and so on. 3. Drafts Save the SMS and MMS that were not sent to drafts. 4. Outbox Save the SMS and MMS that were sent failed to outbox. 5. Sent messages Save the SMS and MMS that you sent when you open the function that save sent message and send and save of MMS. 6. Archive You can move SMS and MMS to archive from inbox and outbox. 7.
6). Input your user name. 7). Input your user password. 8). Activate the account you set. 9). Account optionsÆEditÆAdvanced settingsÆOutgoing serverÆ Authentication Æ on 10). You can edit email and send or receiver. NOTES: In email accounts menu, select email accountsÆ optionÆeditÆ advanced settings, you can set outgoing/incoming server, signature and account settings. 10. Broadcast message Use the menu to set the broadcast message. 11. Templates Use the templates to the SMS or MMS. 12.
Switch picture: switch between large and small picture. Hide small picture: close small picture. Video call settings: it contains four options: answer mode, dial mode, image in video call and audio options. Advanced: setting video quality. 6.7 Organizer 6.7.1 File manager Manage the files that saved in the phone and memory card. You can play, edit, send, delete, and use the files. 6.7.2 Calendar Enter the menu, press [options] to set the followings: View Tasks: Set or view the task.
Delete overdue : Delete the task that overdue. Delete All : Delete all the tasks in the phone. Jump to date : Jum p to the specified date. View uncompleted : View the task that is uncompleted. Send vCalendar : It provides four options: send by SMS, send by MMS, send by Bluetooth. Save as file: Save to file. 6.7.4 Alarm In edit mode, press [Edit] to set the followings: time, Repeat, Audio options, Snooze(mins), Alert type. 6.7.5 World clock You can look up the time of the other city in the world. 6.7.
6.8.3 User profiles It provides six profiles: General, Meeting, Outdoor, indoor, Headset, Bluetooth. Press [options] to set the followings: Activate: Activate the profile. Customize: It contains six options: Tone setup, Volume, Alert type, Ring type, Extra tone, Answer mode. 6.8.4 Phone Settings 1.Time and Date Use the menu to set time and date. It contains three options: Set home city, Set time/date, Set format. 2. Schedule power on/off Use the menu to schedule the time of power on/off 3.
9. Auto Update of Date and Time Open or close the auto update of data and time. 10. UART setting Select SIM1 or SIM2 for UART setting. 11. Misc. settings You can set the LCD Backlight. Change the brightness and time of the background light by the left and the right direction key. 6.8.5 Network setup 1. Network selection: you can search the network you want by manual/auto 2. Preferences: press left soft key, you can do the following options: add from the list, new, change priority, delete. 3.
1. Bluetooth Enter the menu to set the followings: Power, Visibility, My device, Search audio device, My name, Advanced. 2. Conn. management View the current data transmission situation. 3. Data account GSM Data: Add or edit the GSM account. GPRS: Add or edit the GPRS account. 6.8.8 Restore Factory Setting The default password is 1122. 6.8.9 Sound effect You can select different effect by the function. 6.9 Multimedia 6.9.
this playlist, options—Add—Memory Card—Choose the Storage Music Folder—Options—Select, now the mobile phone will set the music by itself. Open the playlist you just set, and choose the music you prefer to enjoy. In the player interface, move the four-way navigation keys to select different operations: start or stop the current music, play the previous or next song, and press number key of two or eight to adjust volume. [Right soft key]: Quit audio player. [Left soft key]: View current playlist and settings.
Edit, Image information, Print, Browse style, Use as, Send, Rename, Delete, Delete all files, Sort by, Storage. 6.9.0 Photo editor Select a photo from phone or memory card, or capture a photo from camera, and then change the image size. You can do the operation according to clip help. 6.9.6 Sound recorder Use the menu to record the voice .Choose the file you saved to operate the followings: New record: Record the new file. Play: Play the recorder file.
6.9.9 Slide show Choose images from phone or memory card to play by way of slide show. 6.10 Email The operation method is same as the function in message menu. 6.11 My favorites The function is the same as the menu of file manager. 6.12 Extra 6.12.1 Calculator Use the menu to do basic calculations, such as addition, subtraction, multiplication and division. Key operations: Left navigation key : Multiplication. Right navigation key : Division. Up navigation key : A ddition.
Enter the menu to use the stopwatch. It provides two options: Typical stopwatch, nWay stopwatch. 6.12.4 Ebook reader Enter the menu, choose the book you saved, press[options] to operate the followings: Open E-Book, Clean up bookshelf, Global settings, Book info, Delete, Delete all files, Sort by, Apply global settings, Help. 6.13 MSN Use the menu to enter MSN, and it needs the support of the network service provider. 6.
FAQ If any problems are encountered while using the cell phone, please solve them with reference to following items. If the problems still exit, please contact dealers or service provider appointed by Novo immediately. ■ “Enter PIN code" appears on the screen: Enter valid PIN code of your SIM card. Please contact network service operator immediately if you do not know the code. ■ “Enter PUK code" appears on the screen: Your SIM card will be locked if you enter wrong PIN code for three times.
■ Standby time declines: Signal at your location is weak so that the cell phone has to search signal for a long time. When you don’t want to answer any call, please power off for a time being. It is also possible that the battery has been used for a long time and approaches its life-span. In this case, please replace the battery. ■ Cell phone fails to boot: Check battery volume or charge the battery. Try to power on while charging.
■ Can not select some functions: The service is not available or network service operator of your location does not support this service. Please contact service provider or dealer or network service operator appointed by Novo immediately.
T-Flash Card Introduction The cell phone support T-Flash card to enlarge the storage. Operations as follows: T-Flash card install/remove The T-Flash card is on the left of the SIM socket. Take out battery first if you install the T-Flash card, and then directly into the T-Flash card. If you remove it, operate as contrary operations of installing. T-Flash card use T-Flash as one of the memorizer of cell phone, format it when you first use, operations as follows: 1.
saved relevant files only, otherwise, can’t show what you save. for example: AUDIO can save these format files: amr, mid, MP3. BOOK can save the format file: txt. PHONEBOOK can save the contacts what exported from the cell phone. PHOTO can save these format files: bmp, gif, jpg. SMS can save the messages what exported from the cell phone. VIDEO can save these format files: MP4, 3GP.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 1.5cm between the radiator & your body.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
