User's Manual

- 20 -
When using the short message function you must first make the necessary
settings.
Enter the “Message Settings” submenu to select operate as follows:
 Profile Setting Please contact your network provider to get the SC
Address. Profile list have one profile, two profiles and four
profiles because the different network supports and SIM card.
Select one Profile, press the left soft key “Edit”, can set the
Profile Name, SC Address, Valid Period and Message Type.
During Valid Period, the short message service centre will
continuously resend a message until it is received. The message
Valid Period is applicable for all sent messages. You can set the
message Valid Period as any of the following: “1 hour”, “6
hours”, “12 hours”, “1 day”, “3 days”,“1 Week” or “maximum”.
The network operators must support this function for it to be
available. Message Type can select the Text, Fax, Page, E-mail by
the left/right keys.
Note: Message Valid Perid, Fax, Page and E-mail need support by the
network operator.
 Common Setting to set On/Off to the Delivery Report. If you set it as
“On”, then when the recipient receives your short message, or if
the short message is not received for some reason, the short
message centre will send a status report so that you can see whether
the message has been delivered.
Note: The network operator must support this function for it to be
available.
 Memory Status to display the memory by n/m form in the SIM card and
phone, thereinto, “n” denote the current memory message, “m”
denote the most message capability in the SIM card or phone. Your
mobile-phone can save 200 items( include Inbox and Outbox) SMS
at most. SMS numbers are decided with SIM card capability in
the SIM card.
 Preferred Storage to select to save the messages to “SIM” or “Phone”.
Multimedia message
The user must make the necessary settings in order to use the multimedia
message.
Enter the "MMS Settings" submenu and make the following settings:
Profiles
You can Activate profile and View profile.
Common settings
Enter the “common setting”submenu and make the following settings:
¾ Compose: include Creation Mode, Image Resizing and Auto
Signature.
¾ Sending: include Validity period, Delivery report, Read report,
Priority, Slide Timing, Delivery time.