User's Manual

contact the network. A moment later, the network will make
a response and send the operation results to the mobile
phone.
¾ Line switching: Switch to Line 1 or Line 2. By default, Line
1 is used.
 Advanced settings
¾ Black list: you can set many numbers. When this Black list
is enabled, you won’t receive the calls from the numbers
entered in the Black list.
¾ Auto redial: Set it to On or Off to enable or disable auto
redial. If you set Auto redial to On, the mobile phone will
automatically redial the number a moment later if the called
party does not reply. The number of auto redial times can be
set to a maximum of 10. In the auto redial period, you cannot
dial other numbers. To end the auto redial process, press the
End key.
Note: This function requires support from the network
operator to which the SIM card is registered.
¾ IP dial:
You should set the IP number first.
¾ Background sound:
To set playback settings and effect list.
¾ Call time reminder: To set single or circle tone in a call to
make you know the time.
¾ Auto quick end: You can select to turn on/off this function.
¾ Reject by SMS：You can select to turn on/off this function.
¾ Answer mode: Select an answer mode as per your need.
1.5
Messaging
The phone supports Short Messaging Service (SMS) and
Multimedia Message Service (MMS). You can send text messages
and manage the messages that you sent and received.
In the standby mode, go to the main menu by pressing the left soft
key, and then select message center to enter into the message