User`s manual

Pin 1 Phoenix
Combicon
Pin 1
3.1 External connections
RJ12 type 6p6 connector:
1
Pin# Signal Description
1 - TEMPX1 Reserved for future use
2 User GND ( Fused )
3 + TEMPX1 Reserved for future use
4 SYNC_IN/OUT Used in option SYNC only
5 DATA Single Wire Clayton Communication
6 REMOTE
Connected to plus pole of the battery switches on the
combi.
Not connected = no influence
Phoenix Combicon MSTB 2.5 / 3-ST-5.08:
Pin# Signal Description
1 DATA Single Wire Clayton Communication
2 REMOTE
Connected to plus pole of the battery switches
on the combi
Not connected = no influence
3 CHG2_OUT Extra charger output ( option )
2
1 The signal wires of the two connectors are connected parallel so the pin out and the signals on the corresponding pins are identical
2 Will be introduced and defined in future only in the case of Combi devices