User manual

Operation

This section describes the three different modes of operation.

- Inverter mode.

Energy is taken from the battery and converted to 230 Vac and delivered at the output

(grey Neutrik).

- Charger mode (Combi only).

Energy is taken from the AC input (blue Neutrik) and passed directly through to the

output. Part of the energy is converted to DC and used to recharge the battery.

- Backup mode (Combi only).

If the device is charging from the AC input, and the inverter mode has been activated,

and the 230 Vac is removed, the Combi will switch to inverter mode.

Inverter mode

The bare minimum setup is shown in the schematic below illustrated with a G3 Combi.