Specifications

Chapter 3: CorePlus Configuration
• Management Workstation Connection, page 19
• Web Interface and Wizard Setup, page 24
• Manual Web Interface Setup, page 31
• CLI Setup, page 46
• Troubleshooting Setup, page 54
• Going Further with CorePlus, page 56
3.1. Management Workstation Connection
CorePlus Starts after Power Up
It is assumed you have now unpacked, positioned and powered up the SG3200 Series unit. If not,
you should refer to the earlier chapters in this manual before continuing.
Clavister's CorePlus network security operating system is preloaded on the hardware and will
automatically boot up after power is supplied.
The Default Management Interface
After first time startup, CorePlus makes management access available on a predefined Ethernet
interface and assigns the private IP address 192.168.1.1 to it.
For the SG3200 Series, the default management interface is the ge1 interface.
Alternative CorePlus Setup Methods
Initial CorePlus software configuration can be done in one of the following ways:
• Through a web browser.
A standard web browser running on a standalone computer (also referred to as the
management workstation) can be used to access the CorePlus Web Interface. This provides an
intuitive graphical interface for CorePlus management. When this interface is accessed for the
19