Specifications

2. Plug the other end of the power cord into a power outlet. The next step depends on the
3200 model:
i. For older 3200 models, press the On/Off switch to apply power and begin boot up of
the hardware.
ii. For the newest 3200C model, there is no On/Off switch so the hardware will boot up
immediately power is supplied.
3. The SG3200 Series will boot up and CorePlus will start. After a brief period of time, CorePlus
will be running and the appliance will be ready for initial configuration from a management
workstation using either the Web Interface or the Command Line Interface (CLI) as the
management interface.
Initial configuration is discussed in detail in Section 3.1, “Management Workstation
Connection”.
Important: Protecting Against Power Surges
It is strongly recommended that the purchase and use of a separate surge protection
unit from a third party is considered. This is to ensure that computer hardware is
protected from damage by electrical power surges.
Surge protection is particularly important in locations where there is a heightened risk of
lightning strikes or where power grid spikes are more common.
Any surge protection unit should be installed exactly according to the manufacturer's
instructions since correct installation of such units is vital for them to be effective.
Chapter 2: Installation
17