Specifications

3.3. Rack Mounting

A Rack Mount Kit is supplied with the E5 for mounting the product in a 19-inch rack. Included

with the kit is the following:

• 2 x side brackets.

• 8 x bracket screws. 4 for securing one bracket to one side of the E5.

The kit is attached to the sides of the E5 unit prior to mounting in the rack. There are pre-drilled

holes in each bracket and in the side of the E5 as shown below.

Align the bracket screw holes with the pre-drilled holes on the side of the E5. Then, fit and

tighten the supplied screws into the holes with a suitable screwdriver as shown below.

Chapter 3: E5 Installation