Specifications

3.2. Flat Surface Installation
The E5 can be mounted on any appropriate stable, flat, level surface that can safely support the
weight of the appliance and its attached cables.
Included with the E5 is a bag of 4 rubber feet that can be attached to the underside of the unit
for operation on a flat surface. This protects both the surface and the appliance from external
damage as well as allowing air to circulate underneath the hardware during operation. The
rubber feet have a strip which is peeled off to reveal adhesive for attachment. There are four
depressions in the E5 casing underside corners where the feet should be located.
Caution: Always leave space around the appliance
Always ensure there is adequate space around the appliance for ventilation and access
to operating switches and cable connectors. No objects should be placed on top of the
casing.
The E5 can also be rack mounted in a 19-inch rack using the kit which is included with the
product and this is described next in Section 3.3, “Rack Mounting”.
Chapter 3: E5 Installation
19