Specifications

B. Registration of the E5 Hardware Unit
These steps describe manual registration of the E5 hardware unit.
Alternatively, if the E5 is connected to the Internet then this registration can be also be
performed automatically by the cOS Core Setup Wizard which will appear as a browser popup
window in the Web Interface when cOS Core starts for the first time.
1. Log in to the Clavister website and select the Register License option.
2. The registration page is displayed. Under the tab Hardware Serial Number and Service
Tag, enter the Hardware Serial Number and Service Tag must be entered. These two codes
are found on a label which should be attached to the E5 hardware itself. The label is
usually found on the hardware's underside but may by found in another position.
Chapter 2: Registering with Clavister
15