User manual

Extern MIDI A/B Bank Sel cc32
This allows you to set a value for a MIDI Bank Select message on
Control Change address 32 (cc32).
M There are many different variations between instruments in how
Banks are numbered and accessed via MIDI. Please consult your
other units manual.
Range: Off (Default), 0-127
Extern MIDI A/B CC Value
This will transmit values for the selected MIDI CC number.
Range: Off (Default), 1-127
Extern MIDI A/B CC Number
This decides which MIDI Controller number the Extern section should
be transmitted when MIDI CC is activated.
Range: MIDI CC 0-119 (Default is 2)
Extern MIDI A/B Send Wheel
This setting toggles if the Stage 2’s Modulation Wheel should transmit
Mod Wheel MIDI data (CC 1) or not.
Range: Yes (Default), No
Extern MIDI A/B Send A.Touch
This setting toggles if the Stage 2’s After Touch should transmit Chan-
nel Touch MIDI data or not.
Range: Yes (Default), No
Extern MIDI A/B Send CtrlPed
This setting toggles if a control pedal connected to the Stage 2’s CTRL
Pedal input should transmit Expression MIDI data (CC 11) or not.
Range: Yes (Default), No
Extern MIDI A/B Vel Curve
Use this setting to adjust the velocity response curves that applies to
the Extern section.
Range: Soft , Norm (Default), Hard
Extern MIDI Send on Load
This setting toggles if any settings for the Program Change, Volume
or MIDI CC messages in the Extern section should be automatically
transmitted from the Stage 2 when a Program is selected, or not.
Range: Off (Default), On
Chapter 11 refereNCe: MeNUS | 45