Specifications
11. System functions: System menu NORD STAGE Eighty Eight V1.1x
Page 60
11. SYSTEM FUNCTIONS
System functions are divided into four menus; “System, Sound, MIDI and Extern”, which are accessed by
using the corresponding buttons in the Program section.
All changes you make to system functions are automatically stored in Nord Stage.
SYSTEM MENU
Press the S
HIFT
+ S
YSTEM
buttons to enter the System menu. You use the P
AGE -/+ buttons to navigate
between the various pages on the System menu, and the V
ALUE DIAL
is used to change settings.
When you are done, press the S
YSTEM
button again to exit the System menu.
The following items can be found on the System menu:
Function Description Range/Values
Transpose Transpose allows you transpose the pitch of instru-
ments up or down in semitone steps
.
-/+ 6 semitones (in steps of
1 semitone). Default value
is “0” (no transpose).
Fine Tune Fine Tune can be used to adjust the pitch of instru-
ments in finer increments.
+/- 50 Cents (half a semi-
tone). Default value is “0”
(no fine tune).
Organ Audio
Output
This allows you to set which channel output pairs (or
mono output) to use for the Organ section.
“1 & 2” (Default), ”3 & 4”,
”3” ,”4”
Piano Audio
Output
This allows you to set which channel output pairs (or
mono output) to use for the Piano section.
“1 & 2” (Default), ”3 & 4”,
”3” ,”4”
Synth Audio
Output
This allows you to set which channel output pairs (or
mono output) to use for the Synth section.
“1 & 2” (Default), ”3 & 4”,
”3” ,”4”
Organ Keyboard
Trig Mode
This allows you to change how the Nord Stage key-
board triggers Organ sounds. When “Fast” is
selected, you will trigger organ sounds before the key
is fully depressed. This mode closely mimics the way
a real B-3 triggers notes.
Fast (Default), Normal
Sustain Pedal
Polarity
This allows you to change the polarity of a connected
sustain pedal, in case the functionality of the pedal is
reversed (i.e. when the pedal is up, sustain is on and
vice versa).
Open, Closed (Default)