Specifications

NORD STAGE Eighty Eight V1.1x 10. The Extern section: The Parameter section
Page 59
MIDI CC
This allows you send MIDI Control Change messages to control a parameter of your choice on the external
instrument. You first have to decide which Controller number the P
ARAMETER
rotary encoder should
send value changes for. This is done on the Extern Menu:
1. Press S
HIFT
and the E
XTERN
button to access the Extern menu.
2. Use the P
AGE buttons to select the “Extern MIDI CC Number” menu page.
3. Use the V
ALUE DIAL to select a MIDI CC Number (0-119). You may want to consult the manual for
the external instrument to see which parameters are assigned to which CC numbers.
4. Press the E
XTERN
button again to exit the menu.
If you now activate the MIDI CC button in the Parameter Select section, you can control the selected ex-
ternal parameter using the P
ARAMETER
rotary encoder in the Extern section. You can turn this off on the
Extern menu - see “Extern menu” on page 63. The external instrument may have to be set to receive MIDI
CC messages for this to function.
A
BOUT
S
END
O
N
L
OAD
You can set whether Program Change, Volume or MIDI CC messages are sent out when you load a Pro-
gram in Nord Stage. If you do not want this to occur, make sure “Send On Load” is set to “Off” on the
Extern menu.