User manual

The Program Section User Manual
8
The Program Section
WHAT IS A PROGRAM?
All sound related knob and button settings, including PRE-
SETS
can be stored into any of three storage areas; PROG,
LIVE 1 and LIVE 2, selectable with the corresponding but-
tons.
With
PROG activated, 126 program locations are available.
The current program location is shown in the
DISPLAY.
Changes need to be stored in order not be lost.
LIVE 1 and LIVE 2 contains one single program each. Chang-
es are saved automatically, so when you load a stored pro-
gram or even when you power off, all settings will be
exactly as you left them the next time you return to that
live program.
LOADING A PROGRAM
When PROG is activated, you can load a program by navi-
gating the
PROG/MENU buttons. Programs will be loaded
automatically.
When a
LIVE program is activated, you can select a stored
program in the
PROG area by navigating the PROG/MENU
buttons, but the program will not be loaded until you press
the
PROG button.
STORING A PROGRAM
To store a program to any of the 126 program locations:
1
Press the store button.
The current program number will flash repeatedly in
the
DISPLAY to indicate you are in store mode.
If the
DISPLAY shows “PRO”, you must turn off memory
protection in the system menu. Please refer to “System
Functions” on page 15.
2
Select program location
Use the PROG/MENU buttons to select a program loca-
tion to store to.
3
Press the store button
The DISPLAY will briefly indicate “STO” to confirm that
the program has been stored.