Specification Sheet

Clausing Radial Drills
Model: CL1600H
Model CL1600H
Working Area:
Column Sleeve Dia. (E) 17" (432mm)
Column Face to Spindle Center
Maximum (D+C) 62.2"
(1580mm)
Minimum (D) 17.3" (440mm)
Spindle Head Travel (C) 44.9" (1140mm)
Base Surface to Spindle End
Maximum (A) 63"
(1600mm)
Minimum (B) 15" (380mm)
Arm Vertical Travel (A-B) 48" (1220mm)
Arm Rotation (Right & Left) 180°
Baseplate Working Surface 70.9" x 40.4"
(1800 x 1026mm)
Box Table Area
Length (L) 27.6"
(700mm)
Width (K) 19.7" (500mm)
Height (H) 15.9" (405mm)
Base Dimensions
Floor Area (R x S) 97.6"
x 41.3" (2480 x 1050mm)
Height (Q) 8.26" (210mm)
Drill Head:
Spindle Taper 5MT
Spindle Stroke 14.6" (370mm)
Quill Diameter 3.94" (100mm)
Number of Spindle Speeds 12
Spindle Speeds (rpm) 40-1920
Number of Steps 6
Spindle Feed Rate (in
(mm)/rev.) 0.003"(.07mm)-0.038"(.96mm)
Spindle Drive Motor (1-speed) 7.5 hp (5.6 Kw)
Elevating Motor 2 hp (1.5 Kw)
Clamping Motor
1 hp (.75 Kw)
Coolant Pump Motor 1/8 hp (.10 Kw)
Dimensions and Weight
Max. Machine Height (F) 124.8" (3170mm)
Base and Column Height (G) 107.7" (2660mm)
Shipping Dim.
Length 112.2"
(2850mm)
Width 55.1" (1400mm)
Height 115.7" (2940mm)
Net Weight 10,805 lbs. (4900kg)
Shipping Weight 11,245 lbs. (5100kg)
Specifications:
Model CL1600H
Capacity:
Drilling
In Steel 2.6" (65mm)
In Cast Iron 2.75" (70mm)
Tapping
In Steel 1.97"
(50mm)
In Cast Iron 2.36" (60mm)
Boring
In Steel 5" (126mm)
In Cast Iron 7.28" (185mm)
Capacities:
Features and Standard Equipment:
● Equipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped then
move vertically, or stop then clamp automatically. Very easy to
operate, and tools will always stay at the same point after tool shifting.
● Gears in gear box are cooled by oil cycled by an oil pump to
minimize gear wear.
●

F
riction type disc clutch absorbs impact force caused by vertical
movement of spindle, and protects all transmission units inside
gear box. With quick spindle return, the clutch will help speed-up
the tapping operation.
● Special automatic tool eject device is supplied to allow you to
change tools quickly. (No drifter is required) Special arm elevating
device is provided to prevent arm from falling down abruptly after.
● Coolant system ● Tool kit and manuals
● 230/3/60 volt standard
H
L
K
G
A
F
Q
B
C
R x S
E
D

Dimensions:
9