Specification Sheet

8
Clausing Radial Drills
Model: CLC1600H
H
L
K
G
A
F
Q
B
C
R x S
E
D
Dimensions:
Model CLC1600H
Working Area:
Column Sleeve Dia. (E) 12.61" (320mm)
Column Face to Spindle Center
Maximum (D+C) 63.00"
(1600mm)
Minimum (D) 13.78" (350mm)
Spindle Head Travel (C) 49.21" (1250mm)
Base Surface to Spindle End
Maximum (A) 55.90"
(1420mm)
Minimum (B) 18.31" (465mm)
Arm Vertical Travel (A-B) 36.7" (932mm)
Arm Rotation (Right & Left) 180°
Baseplate Working Surface 70.9" x 40.4"
(1800 x 1026mm)
Box Table Area
Length (L) 24.8"
(630mm)
Width (K) 19.7" (500mm)
Height (H) 19.7" (500mm)
Base Dimensions
Floor Area (R x S) 100.4" x 38.2"
(2550 x 970mm)
Height (Q) 7.9" (200mm)
Drill Head:
Spindle Taper 5MT
Spindle Stroke 10.63"
(270mm)
Quill Diameter 3.15" (80mm)
Number of Spindle Speeds 12
Spindle Speeds (rpm) 56-1450
Number of Feeds 3
Spindle Feed Rate (in(mm)/rev.)
0.0023"(.06mm), 0.004"(.10mm), 0.008"(.20mm)
Spindle Drive Motor (2-speed) 5 hp (3.8 Kw)
Elevating Motor 1 hp (.75 Kw)
Clamping Motor 1 hp (.75 Kw)
Coolant Pump Motor 1/8 hp (.10 Kw)
Dimensions and Weight:
Max. Machine Height (F) 108.7" (2760mm)
Base and Column Height (G) 86.1" (2186mm)
Shipping Dim.
Length 105.2"
(2670mm)
Width 44.1" (1120mm)
Height 94.9" (2410mm)
Net Weight 7,275 lbs. (3300kg)
Shipping Weight 8,378 lbs. (2800kg)
Specifications:
Model CLC1600H
Capacity:
Drilling
In Steel 1.97" (50mm)
In Cast Iron 2.36" (60mm)
Tapping
In Steel 1.57" (40mm)
In Cast Iron 1.97" (50mm)
Boring
In Steel 4.33" (110mm)
In Cast Iron 6.55" (165mm)
Capacities:
Features and Standard Equipment:
●

E
quipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped then
move vertically, or stop then clamp automatically. Very easy to
operate, and tools will always stay at the same point after tool shifting
● Gears in gear box are cooled by oil cycled by an oil pump to
minimize gear wear
● Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
● Friction type disc clutch absorbs impact force caused by vertical movement
of spindle, and protects all transmission units inside gear box. With quick
spindle return, the clutch will help speed-up the tapping operation
● Special arm elevating device is provided to prevent arm from falling
down abruptly after years of usage
● Coolant system ● Tool kit and manuals
● 230/3/60 volt standard or other voltages require optional transformer
or special order
Shown with Optional Tilt Table