Specification Sheet

Clausing Radial Drills
Model: CL1230H
Model CL1230H
Working Area:
Column Sleeve Dia. (E) 11.81" (300mm)
Column Face to Spindle Center
Maximum (D+C) 46.1"
(1170mm)
Minimum (D) 13.4" (340mm)
Spindle Head Travel (C) 35.0" (890mm)
Base Surface to Spindle End
Maximum (A) 53.9"
(1370mm)
Minimum (B) 19.3" (490mm)
Arm Vertical Travel (A-B) 34.6" (880mm)
Arm Rotation (Right & Left) 180°
Baseplate Working Surface 48" x 29.1"
(1219 x 739mm)
Box Table Area
Length (L) 25.1" (640mm)
Width (K) 20.4" (520mm)
Height (H) 16.5" (420mm)
Base Dimensions
Floor Area (R x S) 67.9" x 28.1"
(1725 x 715mm)
Height (Q) 7.1" (180mm)
Drill Head:
Spindle Taper 4MT
Spindle Stroke 9.84"
(250mm)
Quill Diameter 3.15" (80mm)
Number of Spindle Speeds 2
Spindle Speeds (rpm) 44-1500
Number of Feeds 3
Spindle Feed Rate (in(mm)/rev.)
0.002"(.05mm), 0.0035"(.09mm), 0.006"(.15mm)
Spindle Drive Motor (2-speed) 3 hp (2.25 Kw)
Elevating Motor 1 hp (.75 Kw)
Clamping Motor 1 hp (.75 Kw)
Coolant Pump Motor 1/8 hp (.10 Kw)
Dimensions and Weight:
Max. Machine Height (F) 109.5" (2780mm)
Base and Column Height (G) 81.1" (2060mm)
Shipping Dim.
Length 80.1"
(2035mm)
Width 32.5" (862mm)
Height 88.2" (2240mm)
Net Weight 4,630 lbs. (2100kg)
Shipping Weight 5,071 lbs. (2300kg)
Specifications:
Model CL1230H
Capacity:
Drilling
In Steel 1.65" (42mm)
In Cast Iron 2.16" (55mm)
Tapping
In Steel 1"
(25mm)
In Cast Iron 1.38" (38mm)
Boring
In Steel 3.38" (86mm)
In Cast Iron 4.72" (120mm)
Capacities:
Features and Standard Equipment:
● High-quality cast-iron arm with heat-treated and ground slides for
smooth and accurate head positioning
● The bearing bracket for gear-box is fitted with standard bearings to
fit arm slide for smooth gear-box operation
● High speed gears are made of Nickel-Chrome Steel and are
heat-treated and ground for durability
● Powerful 3 Hp, 2-speed, heavy-duty spindle drive motor
● Overload protection device
● The main spindle is balanced by an adjustable block
● Coolant system
● Low volt and overload protection
● Equipped with hydraulic clamping. With a push of a button you can have
arm unclamped then move vertically, or stop then clamp automatically
● Tool kit and manuals
● 230/3/60 volt standard or other voltages require optional
transformer or special order
H
L
K
G
R x S
A
D
E
F
Q
C
B
Dimensions:
6