Specification Sheet

Clausing Radial Drills
Model: CLC2500
Model CLC2500
Working Area:
Column Sleeve Dia. (E) 21.65" (550mm)
Column Face to Spindle Center
Maximum (D+C) 98.4"
(2500mm)
Minimum (D) 19.7" (500mm)
Spindle Head Travel (C) 78.7" (2000mm)
Base Surface to Spindle End
Maximum (A) 78.7"
(2000mm)
Minimum (B) 21.6" (550mm)
Arm Vertical Travel (A-B) 57.1" (1450mm)
Arm Rotation (Right & Left) 180°
Baseplate Working Surface 86.8" x 43.4"
(2205 x 1102mm)
Box Table Area
Length (L) 39.4"
(1000mm)
Width (K) 31.5" (800mm)
Height (H) 22" (560mm)
Base Dimensions
Floor Area (R x S) 138.6"
x 55.1" (3520 x 1400mm)
Height (Q) 12.6" (320mm)
Drill Head:
Spindle Taper 6MT
Spindle Stroke 17.7"
(450mm)
Quill Diameter 3.94" (100mm)
Number of Spindle Speeds 16
Spindle Speeds (rpm) 16-1250
Number of Steps 16
Spindle Feed Rate (in
(mm)/rev.) 0.0015"(.04mm)-0.126"(3.20mm)
Spindle Drive Motor (1-speed) 10 hp (7.5 Kw)
Elevating Motor 5 hp (3.6 Kw)
Coolant Pump Motor 1/4 hp (.18 Kw)
Dimensions and Weight:
Max. Machine Height (F) 157" (3990mm)
Base and Column Height (G) 151.6" (2660mm)
Shipping Dim.
Length 158"
(4000mm)
Width 63" (1600mm)
Height 151.6" (3850mm)
Net Weight 24,250 lbs. (11000kg)
Shipping Weight 27,557 lbs. (12500kg)
Specifications:
Model CLC2500
Capacity:
Drilling
In Steel 3.15" (80mm)
In Cast Iron 3.98" (100mm)
Tapping
In Steel 2.56"
(65mm)
In Cast Iron 2.95" (75mm)
Boring
In Steel 6" (150mm)
In Cast Iron 10" (250mm)
Capacities:
Features and Standard Equipment:
● Equipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped then
move vertically, or stop then clamp automatically. Very easy to
operate, and tools will always stay at the same point after tool shifting
● Gears in gear box are cooled by oil cycled by an oil pump to
minimize gear wear
● Friction type disc clutch absorbs impact force caused by vertical
movement of spindle, and protects all transmission units inside
gear box. With quick spindle return, the clutch will help speed-up
the tapping operation
● Special arm elevating device is provided to prevent arm from falling
down abruptly after years of usage
● Coolant system
●Tool kit and manuals
●230/3/60 volt standard
H
L
K
G
A
F
Q
B
C
R x S
E
D

Dimensions:
11