Operation Manual

21 EN
•The PROGRAM screen will appear.
2) Press
K or L to select a track, then press ENTER.
•Up to 99 programmes can be stored.
•Press
CLEAR to erase the most recently entered
programme.
•To erase all programmes at once, select “ALL CLEAR”
at the bottom of the list and press
ENTER.
•When selecting an MP3 file or folder, use
Arrow as
follows:
Press
B to go the next hierarchy.
Press
s to go back to the previous hierarchy.
•When more than 8 tracks or files are programmed, press
SKIP H,G to see all the pages.
3) Press
PLAY to start the programmed playback.
Note: • While a programme is being played back, STOP works
as follows:
Press
STOP, and then PLAY next, so that the
programmed playback restarts.
(CD playback restarts from the current position. MP3
playback restarts from the beginning of the current
track.)
Press
STOP twice and PLAY next, so that playback
restarts from the first track in the original order.
However, your programmed playback can be restarted
when you follow the above steps. (Your programmes
are still stored unless either the disc tray is open or the
unit is turned off.)
• To repeat the current track in the program, press
REPEAT repeatedly until TRACK appears during
playback.
• To repeat the entire programme press REPEAT
repeatedly until ALL appears during playback.
Random Playback
This shuffles the playing order of tracks instead of playback in
the sequence.
1) In Stop mode, press
MODE repeatedly until the
“RANDOM” screen appears on the TV screen.
2) Press
PLAY to start random playback.
Note: • If you like to repeat the current track in the random
selections, press REPEAT repeatedly until TRACK
appears during playback. If you like to repeat the
entire random selections, press REPEAT repeatedly
until ALL appears during playback.
On-Screen Information
You can check the information about the current playback by
pressing
DISPLAY.
1) Press
DISPLAY during playback.
•Current chapter number/ total chapters, elapsed time
and remaining time of the current chapter, and current
playback status will be displayed.
2) Press
DISPLAY again.
•Current title number/ total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3) Press
DISPLAY the third time.
•The bit rate (the amount of audio and video data
currently being read) and current playback status will be
displayed.
•Current repeat setting appears only when the repeat
setting is active.
•( C: Chapter repeat/ T: Title repeat/ A B: A-B
repeat)
•If you are playing a 2-layered disc, the layer number will
also be displayed.
•(L0: Layer 0 is playing, L1:Layer 1 is playing)
4) Press
DISPLAY repeatedly until on-screen information
disappears.
1) Press DISPLAY during playback.
•Current track number/ total tracks, elapsed time and
remaining time of the current track, and current
playback status will be displayed.
•Current repeat setting appears only when the Repeat
setting is active.
( T:Track repeat/ A:All Tracks repeat/ A B:A-B
repeat)
2) Press
DISPLAY again.
•Current track number/ total tracks, elapsed time and
remaining time of the current disc, and current playback
status will be displayed.
•Current repeat setting appears only when the Repeat
setting is active.
3) Press
DISPLAY repeatedly until on-screen information
disappears.
1) Press
DISPLAY during playback.
•The name of the file currently in play and current
playback status will be displayed.
2) Press DISPLAY again.
• Current track number/ total tracks, elapsed time of the
current track, and current playback status will be
displayed.
• Current repeat setting appears only when the Repeat
setting is active. ( T:Track repeat/ G:Group repeat/
A:Disc repeat)
3) Press
DISPLAY repeatedly until on-screen information
disappears.
CD MP3
DVD-V
CD-DA
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
CD
MP3
11/16 0:00:00 - 0:03:30
4/12 0:03:21 - 0:02:15
T
TRACK 01
H97A6ED(EN).fm Page 21 Wednesday, March 24, 2004 9:44 AM