Operation Manual

ENGLISH
10
DISPLAY / MENU BUTTON
This DISPLAY inter-change button can be used to interchange between the 2 types of DISPLAY INTERFACE, the 'Image
Display Interface” & 'Big Font Display interface'.This is useful when playing a CD or MP3 or WMA or other music disc
and if user prefers to see the CD Track no / MP3 File number and elapse time with bigger numerical fonts, the Big Font
Display offers a better read out for the numerical display. User can press the DISP button to inter-change from Image
Display
Caution:
In some countries, it's unlawful to operate a vehicle while video is displayed in the driver's viewing area. Please always
switch the unit's display to "Big Font Type Display" mode by pressing the DISP/MENU button while driving. For safety
reason, the driver should only enjoy / watch the video while the car is in parking mode.
- RESET
After releasing the front panel, use a pencil or any non-metallic object to press & hold the reset button for five
seconds to reset the main unit and the unit will return to the factory default settings.
- TO RESET THE DVD SETTING
Press SET UP button on remote control or long press AS/PS button to bring up the SET UP
Menu, select RATING then select DEFAULT, the DVD Setting will resume to factory default
value .
MENU OPERATIONS
MENU FUNCTION LIST (MENU)
Press & hold the DISPLAY/ MENU button for more than 3 seconds to access into the menu. User can navigate thru the
menu items by pressing the DISPLAY/ MENU button repeatedly, or by pressing the Tuning Up or Tuning Down Buttons
to move to the next or previous menu item. Once the desired menu item appears on the display, user can adjust that
option by using the Encoder Vol Knob within 5 seconds.The menu items can be adjusted as described below:
ANGLE
The panel viewing angle of the display can be adjusted by rotating the encoder vol knob to select the most appropriate
viewing angle.This is useful for user to adjust & obtain the optimum viewing angle inside the vehicle.
CONTRAST
The contrast level of the TFT display is set at "CONTRAST 10" by default. User can use the Encoder Vol Knob to adjust
the contrast level from 00 to 50.
BRIGHT
The brightness level of the TFT display is set at "BRIGHT 20" by default. User can use the Encoder Vol Knob to adjust
the brightness level from 00 to 50.
COLOR
The color level of the TFT display is set at "COLOR 30" by default. User can use the Encoder Vol Knob to adjust the
color level from 00 to 50.
Image Display Interface
Big Font Display Interface
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 10