Operation Manual
64
Accessories
• Clean the glass plate in warm soapy water or in the dishwasher. Dry
it before reinstalling it in the microwave.
• Clean the roller ring and the inner bottom surface regularly. Remove
the roller ring and clean by hand using a mild detergent. Dry the roll-
er ring thoroughly and then reinstall it on the bottom of the cooking
chamber.
• Clean the grill after each use with a dishwashing detergent or place
it in a dishwasher for cleaning.
Odours
• In order to remove any unpleasant odours that may emanate from
the microwave, place a dish lled with water and lemon juice that is
suitable for microwave use in the oven and heat it for approximately
5 minutes. Then wipe out the oven with a soft cloth.
Oven light
• If you need to replace the lighting in the oven, please contact a
specialist workshop near you.
Troubleshooting
Malfunctions are often just caused due to minor problems. Before con-
tacting our customer service, please check the table below:
Problem Possible cause Notes / solution
Radio or TV recep-
tion is interrupted
during microwave
operation.
The electromagnetic
elds of this device
might interfere with the
pictures and sound of
special frequencies.
This is normal and not
a malfunction. Position
the devices further away
from each other.
The device is not
supplied with elec-
tricity; the display is
black.
Defect wall socket. Try another wall socket.
Check the main fuse in
your household.
The display does
not show the current
time.
There was a power
failure.
Set the clock again.
The device does
not start operation.
The display shows
a readout other than
the current time.
The door is not properly
closed.
Check if there are objects
or food remains jammed
in the door.
Pause in automatic
cooking program 07
“Chicken” or in auto-
matic cooking program
09 “Defrosting”.
If necessary, ip over the
food.
Press the START button
to start or continue
operation. Press the
STOP/CANCEL button to
cancel the program.
The START button
was not pressed after
selecting the function.
All controls are
locked.
The child-proof lock is
activated.
Press and hold the
STOP/CANCEL button
for 3 seconds to unlock
the appliance.
The turn-table caus-
es a scratching or
abradant noise.
There are dirt or foreign
objects in the area of
the turntable shaft.
Remove possible objects
and food remains as de-
scribed under “Cleaning”.
The operation is
terminated without
any obvious reason.
The device is defect. Please contact our cus-
tomer service.
Problem Possible cause Notes / solution
Display shows
“E01”. Continuous
beep.
Overheat protection
has been activated.
Stop the appliance. You
can keep the door closed
with the food inside.
It is not necessary to
disconnect the appliance
from the mains. Wait for
the appliance to return
to normal mode for you
to continue operation. It
might be necessary to
enter the previously used
program again.
Display shows
“E02”. Continuous
beep.
A component is mal-
functioning.
Display shows
“E03”. Continuous
beep.
A component is defec-
tive.
Please contact our cus-
tomer service.
Technical Data
Model: ......................................................................................MWG 788 H
Power supply: ............................................................... 230-240 V~, 50 Hz
Power consumption:
microwave: ...............................................................................1200 W
grill: ............................................................................................ 1350 W
convection: ............................................................................... 1350 W
Rated microwave power output: ...................................800 W / 2450 MHz
Cavity volume: .................................................................................20 litres
Protection class: ..........................................................................................I
Net weight: ........................................................................approx. 13.60 kg
The right to make technical and design modications in the course of
continuous product development remains reserved.
This device has been tested according to all relevant current CE guide-
lines, such as electromagnetic compatibility and low voltage directives,
and has been constructed in accordance with the latest safety regula-
tions.
Disposal
Meaning of the “Wheelie Bin” Symbol
Take care of our environment; do not dispose of electrical appliances via
the household waste.
Dispose of obsolete or defective electrical appliances via municipal
collection points.
Please help to avoid potential environmental and health impacts through
improper waste disposal.
You contribute to recycling and other forms of utilization of old electric
and electronic appliances.
Your municipality provides you with information about collecting points.