Operation Manual

95
Carrying out basic settings
Changing system settings
Ö Press the "MENU" key on the remote control.
Ö Call up the "Installation" menu.
If the installation lock is activated (see page 99), you will
be prompted to enter the password (PIN code). (The devi-
ce PIN code is set to 0000 by default.)
The following settings can be carried out in the "System Settings"
menu:
Attention!
In the case of "Antenna Power", select only the option "On"
when connecting an active room antenna. The receiver or the
antenna may otherwise be damaged.
Setting Options Explanation
Language German, Dutch, The desired language for the onscreen
Italian, Spanish, menu can be set here.
Italienisch, Spanisch,
French, Turkish,
Arabic, Persian
Greek, Portuguese,
Russian, English
Audio Up to four different audio languages
Language may be set here.
Screen 4:3/16:9 Select either 4:3 format or 16:9 format
Format LETTERBOX/AUTO (widescreen) depending on the size of
your screen. With the "LETTERBOX"
setting the widescreen format is shown
in full. The picture is reduced in size.
You will see black edges at the top and
bottom of the screen. With the "AUTO"
setting the device switches automatically
between the 4:3 and 16:9 format,
depending on the programme.
Video RGB/FBAS Leave the setting as "RGB" if your
Output receiver is connected via the SCART cable.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 95