Operation Manual

86
Connecting the receiver
Connecting a digital audio receiver
If you would like to use 5-channel audio transmission (Dolby Digital
Sound/AC3), you must connect your digital audio receiver to the
DVBT 704 receiver's coaxial output.
The coaxial cable is not included in delivery.
The coaxial digital output of the device only carries the
audio signals of tuner A.
Ö Insert the coaxial cable into the "S/P DIF" connection on the
receiver.
Ö Connect the coaxial cable to the digital audio receiver.
Attention!
Note the specifications for connecting in the operating instruc-
tions supplied with your digital audio receiver.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 86